Nikko-Materials.Co., Ltd

Yokohama-city,  Kanagawa 
Japan
http://www.nikko-materials.com/
  • Booth: 2448


We incessantly explore the future of laminator technology.

Laminating film type material in vacuum environment is the most suitable material application method for today’s microfabrication of devices.

Nikko-Materials is the leading solution provider of Lamination Technology for more than 20 years in electronics industry, and always will be.

Our R&D and field application engineering team will be by your side and make your lamination process a big success.

●3-stage automated laminator (position control press) CVP-1600SP, CVP-1700SP (New)

●2-stage automated laminator CVP-300, CVP-600, CVP-700

●1-stage automated laminator CV-300, CV-600

●Manual type diaphragm laminator V-130, V-160

●Film auto-cutter and pre-tacking Device NT-300, NT-400 (New)

●Carrier film CF123/ECF126

 Products

  • CVP-600 （2-stage Laminator)
    CVP-600 is automated 2 stage vacuum rubber press laminator Its 1st stage works as laminator and the 2nd works as flattening press. CVP-600 has become Industry Standard of build-up material and solder resist lamination....

    • Equipment Structure：
    -Carrier Film Conveyance System(Film Forwarder/ Film Rewinder)
    -Rubber Press Laminator(1st) + Hydraulic Press Unit(2nd)

    Lamination Method: Rubber Press Laminator

    Footprint：(L) 4135mm x (w)3145mm x (h)1935mm

    Acceptable Worksize：MAX510 x 510(mm)

    Utilities：

    Compressed air（0.5～0.6MPa）
    Forced Exhaust

    3-Phase AC 220V
    Cooling Water for vacuum pump: 2~3L/Min

  • CVP-300(2-stage laminator)
    CVP-300 is automated laminator system which consists of diaphragm laminator(for 1st stage) and flattening press(for 2nd stage) With its high flattening capability, it is suitable for build-up and solder resist lamination process....

    • Equipment Structure：
    -Carrier Film Conveyance System(Film Forwarder/ Film Rewinder)
    -Diaphragm Lamination Chamber(1st) + Hydraulic Press Unit(2nd)

    Lamination Method: Diaphragm

    Footprint： (L) 4135mm x (w)3180mm x (h)1935mm

    Acceptable Worksize： MAX510 x 610(mm)

    Utilities：
    Compressed air（0.5～0.6MPa）
    Forced Exhaust
    3-Phase AC 220V
    Cooling Water for Vacuum Pump： 2~3L/Min

  • V-130 & V-160 (Manual type Laminator)
    V-series is manual type laminator. Operator only needs to place Material on lower chamber and hit the button and all lamination procedure will be completed. Materials can be laminated: PCB, LED substrate, Wafer etc…...

    • Equipment Structure: Manual Type Laminator(Single Chamber)

    Lamination Method: Diaphragm

    Footprint:
    V-130 (L) 2305mm x (w)1130mm x (h)1905mm
    V-160 (L) 1920mm x (w)1665mm x (h)2090 mm

    Acceptable Worksize:
    V-130: 350mm x  350mm
    V-160: 610mm x 610mm

    Utilities:
    Compressed Air (0.5~0.6MPa)
    Forced Exhaust
    3-Phase AC 220V
    Cooling Water for Vacuum Pump:(2~3L/min) for vacuum pump
    (*Some pumps does not need cooling water)

  • CVP-1600SP & CVP-1700SP (3-stage Laminator)
    CVP-1600SP & CVP-1700SP is automated 3 stage vacuum rubber press laminator Its 1st stage works as laminator and the 2nd&3rd works as flattening press. ...

    • Equipment Structure：
    -Carrier Film Conveyance System(Film Forwarder/ Film Rewinder)
    -Rubber Press Laminator(1st) + Hydraulic Press Unit(2nd) + Servo Press Unit(3rd) 

    Lamination Method: Rubber Press Laminator

    Footprint：(L) 7035mm x (w)3645mm x (h)2170mm

    Acceptable Worksize：MAX510 x 610(mm)

    Utilities：

    Compressed air（0.5～0.6MPa）
    Forced Exhaust

    3-Phase AC 220V
    Cooling Water for vacuum pump: 2~3L/Min

  • NT-300(Film pre-tacking Laminator)
    NT-300 is film pre-tacking equipment. It will automatically; 1. feed film material on substrate 2. Pre-tack the film with heat 3. convey the film-tacked substrate to laminator units....

    • Equipment Structure：
    Pre-tacking Unit / Input conveyor /Output conveyor

    Footprint：(w)3020mm x (L)2050 x (h)2220mm

    Acceptable Worksize：MAX (w)510mm x (L)510mm

    Utilities：
    Compressed Air（0.5~0.6MPa）
    Forced Exhaust
    3-Phase AC 220V

Categories

200 Equipment, Assembly
  • Molding; Encapsulation; Decapsulation Equipment
    • 201 Equipment, Flat Panel Display
  • Seal Patterning Equipment
    • 202 Equipment, General Use
  • Heating; Annealing; Curing Equipment - Furnaces; Conveyors; Ovens; Test Chambers; Heat Treating
    • 300 Materials, Assembly
  • Package Substrates; Laminate; Film based
  • Printed Circuit Boards (PCB); Printed Wire Boards (PWB)
  • Molding; Encapsulation; Potting; Resin Materials
  • Thin Film; Dielectric Film Materials
    • Loading ...

    :
    :


    Legend
    Available Timeslot
    Scheduled Appointment
    Personal Appointments
    Appointment Request
    Blocked Timeslot
    Restricted Timeslot
    Cancelled
    Declined