Goodwill Instrument(M) Sdn. Bhd.

Penang, 
Malaysia
http://www.gwinstek.com/
  • Booth: 117


Your best partner for test and measurement solutions!

​Founded in 1975, Good Will Instrument Co., Ltd, also known as GW Instek, was the first professional manufacturer in Taiwan specializing in electrical test & measurement instruments. GW Instek began as as manufacturer of power supplies and quickly expanded into development of high precision electronic test and measurement instruments.

After decades of experience in the test and measurement industry, GWInstek has grown to become the largest manufacturer and developer of test and measurement instrument in Taiwan. Today GW Instek has more tah 300 product items, ranging from oscilloscopes, spectrm analyzers, signal sources, power supplies, digital meters, LCR meters and safety testers to video surveillance system. GW Instek has also seen its present grosth internationally. With headquarters located in Taipei, Taiwan, GW Instek has sudsidiaries in nMainland China, America, Japan, Korea and Malaysia. Its products are sold to more than 80 countries worldwide.


 Products

  • APS-7000 Series 1kVA Programmable AC Power Source
    APS-7000 series has maximum rated output for APS-7050 at 500VA, 600Vrms, 4.2Arms and APS-7100 at 1000VA, 600Vrms, 8.4Arms. The output frequency range is 45~999.9Hz....

  • GW Instek Presents the APS-7000 Series 500/1000 VA Programmable AC Power Source

    APS-7000 series has maximum rated output for APS-7050 at 500VA, 310Vrms, 4.2Arms and APS-7100 at 1000VA, 310Vrms, 8.4Arms. The output frequency range is 45~500Hz. With option, it improves the output voltage range to 600Vrms and output frequency range to 999.9Hz. APS-7000 series is ideal for test and development of DC power supply devices, consumer electronics, automotive electronics and electronic components. APS-7000 series has 9 measurement functions which provide user interface similar to AC power meter. By switching many sets of current levels to increase small current measurement resolution, it is ideal for the LED industry and standby mode power consumption test. Under ARB mode, it provides many waveforms, which include sine wave, triangle wave, staircase wave, clipped sinewave, crest factor wave, and Fourier series to meet requirement of simulating abnormal input power waveform test of different industry. To meet the test criteria of line voltage fluctuation often seen in consumer electronics, APS-7000 series features 5 methods to cope with special purpose or abnormal voltage, frequency, and phase: Simulate Mode, Sequence Mode, Program Mode, Ramp Control, Surge/Dip Control. 10 sets of Simulate Mode simulate power outage, voltage rise and voltage fall. 10 sets of Sequence Mode allow users to define parameters and produce sine wave by editing steps. 10 sets of Program Mode can edit AC waveform output and define the ceiling and floor levels of measurement items for different DUT. Ramp Control allows users to set the variation speed for output voltage rise and fall. Surge/Dip Control simulates DUT’s input power producing a surge or dip voltage overlapping with output voltage waveform at a specific time.

    Features:

    l   4.3” large LCD Display

    l   Measurement Functions: Voltage, Current, Power, Frequency, Power Factor, Crest Factor, Apparent Power, Ipeak, Ipk hold

    l   Surge / Dip Control Mode

    l   Frequency: Up to 500.0Hz (standard), up to 999.9Hz (option)

    l   Voltage range (RMS): 155V (standard) / 310V (standard) / 600V (option)

    l   OVP / OCP / OTP Protection

    l   Simulate Mode, Sequence Mode, Program Mode

    l   Ramp Control Function

    l   ARB (Function Waveform) Mode

    l   Standard interface: USB / LAN

    l   Optional interface: RS-232 & USB CDC / GPIB

    For more information, please visit http://www.gwinstek.com

  • GSP-9330 Spectrum Analyzer
    GSP-9330 is a high test speed spectrum analyzer with 3.25GHz range. Modulation signals like AM, FM, ASK, FSK, and others, can be easily analyzed via high speed sweep time at 204us. It has incorporated the EMC pretest solution to facilitate EMC tests....

  • GW Instek Presents the New GSP-9330 Spectrum Analyzer

    The new GSP-9330, a high test speed spectrum analyzer with 3.25GHz, provides the fastest 204us sweep speed. User, via high speed sweep time, can easily handle analyze modulation signals. The keys to handling modulated signals are fast sweep time and signal demodulation functions. In addition to the analog AM/FM demodulation analysis function, GSP-9330 also provides digital signals ASK/FSK, and 2FSK demodulation and analysis capabilities. Nowadays, EMC issues are very crucial to product’s design processes. Therefore, GSP-9330 has incorporated the EMC pretest solution to facilitate EMC tests. The simple and easy EMC pretest procedures from GSP-9330 can tremendously shorten users’ product launch timeline.

    Features:

    l   3.25GHz frequency range

    l   Fastest sweep speed up to 204us

    l   Frequency stability of 0.025ppm allows GSP-9330 to be stable quickly after powered up

    l   Support AM/FM analog signals demodulation and analysis

    l   Support ASK/FSK digital signals demodulation and analysis

    l   Support 2FSK digital signal analysis

    l   Complete EMC pretest solution (EMI Detect Mode: Quasi-Peak, Average; EMI Filter (-6dB): 200Hz, 9kHz, 120kHz, 1MHz; Dedicated EMC function key)

    l   GKT-008 near field probe set for EMI Pretest

    l   GLN-5040A/GIT-5060 for EMI Conduction tests

    l   Signal channel analysis: Channel power, OCBW, ACPR, N-dB bandwidth, SEM

    l   CATV parameter tests focus on CNR, CSO, and CTB parameters

    l   Signal source’s stability characteristics can be tested via Phase Noise and Phase Jitter

    l   Component’s or system’s linearity test can be confirmed by TOI and P1dB functions

    l   Other measurement applications include Harmonic, Frequency Counter, Time Domain Power, and gated sweep

    l   Spectrogram traces changes of frequency and power vs. time

    l   Topographic uses color shade to show the probability distribution of signal appearance

    l   Split-Window allows independent observation and settings for spectrum with different frequency bandwidths

    l   Limit line function determines whether the tested signal passes the test

    l   Users can set up automatic wake-up time to save time from manual setting

    l   The sequence function exempts users from writing programs

    For more information, please visit http://www.gwinstek.com

  • MFG-2000 Series Multi-Channel Function Generator
    MFG-2000 has up to 5 simultaneous output channels, including CH1 & CH2 arbitrary function generator up to 60MHz, an RF signal generator capable of 320MHz sine wave and various modulation RF signals, a 25MHz pulse generator, and a power amplifier....

  • GW Instek Presents the New MFG-2000 Series Multi-Channel Function Generator

    MFG-2000, a multi-channel function generator, has up to 5 simultaneous output channels, including CH1 and CH2 equivalent performance dual channel arbitrary function generator with the maximum 60MHz for both channels; RF signal generator, a standard AFG, which produces the maximum 320MHz sine wave and various modulation RF signals; pulse generator, whose frequency reaches 25MHz; power amplifier, which is ideal for audio range. The above-mentioned 5 different functionality channels are separately or totally allocated on 10 models to satisfy various educational and industrial applications.

    Features:

    l   Maximum 5 output channels, with 2 arbitrary channels up to 60MHz, 1 RF channel up to 320MHz, 1 pulse generator up to 25MHz, and 100kHz 20W low frequency power amplifier

    l   True Point by Point output arbitrary waveform function: 200MSa/s, 100MHz repetition rate, 14-bit resolution, 16k points memory depth

    l   Earth Ground Isolation design among I/O terminals and instrument chassis

    l   Frequency counter: 150MHz, 8 bits

    l   AM/FM/PM/ASK/FSK/PSK/SUM/PWM Modulation

    l   USB Host/USB Device/LAN interface (MFG-22xx)

    l   4.3” TFT Color Display

    For more information, please visit http://www.gwinstek.com

  • MSO-2000 Series Mixed Signal Oscilloscope
    MSO-2000, a mixed-signal oscilloscope, has superb functions including the highest waveform update rate of 120,000 wfm/s in the same class & 10M memory depth per channel. It has options of 16-channel logic analyzer and a 2-channel 25MHz waveform generator....

  • GW Instek Presents the New Economical and Multi-Functional MSO-2000 Series Mixed Signal Oscilloscope

    MSO-2000, a mixed-signal oscilloscope, is developed from the high performance software and hardware platforms of GDS-2000E, which boasts the superb functions including the highest waveform update rate of 120,000 wfm/s in the same class and 10M memory depth per channel to allow users to completely retrieve and analyze waveforms. The series includes MSO-2000E and MSO-2000EA. MSO-2000E has a built-in 16-channel logic analyzer and MSO-2000EA has a built-in 16-channel logic analyzer and a dual channel 25MHz arbitrary waveform generator.

    Features:

    l   200/100/70MHz bandwidth selections: 2 or 4 channels

    l   MSO-2000E equips with a 16-channel logic analyzer

    l   MSO-2000EA equips with a 16-channel logic analyzer and a dual channel 25MHz arbitrary waveform generator

    l   Real time sample rate for each channel is 1GSa/s (2-channel models); Maximum real time sample rate is 1 GSa/s (4- channel models)

    l   Maximum 10M memory depth and VPO waveform display technology

    l   Waveform update rate up to 120,000 wfms/s

    l   8” WVGA TFT LCD screen display

    l   Maximum 1M FFT provides higher frequency domain resolution measurements

    l   High pass and low pass filter functions

    l   29,000 segmented memory sections and waveform search function

    l   I2C/SPI/UART/CAN/LIN serial bus trigger and decoding functions

    l   Data log function is able to track signal changes up to 100 hours

    l   Network storage function

    For more information, please visit http://www.gwinstek.com

  • PPH-1503D High Precision DC Power Supply
    PPH-1503D is a high precision 2-channel DC power supply. It has high resolution at 1mV/0.1uA & small pulse current width of 33us, with excellent transient recovery time in less than 40us. It has battery simulation function with current sink capability....

  • GW Instek Presents the New PPH-1503/1503D Programmable High Precision DC Power Supply

    PPH-1503D is a programmable high precision dual-channel DC power supply with CH1 output power at 45W and CH2 output power at 18W. PPH-1503D’s capabilities of high resolution at 1mV/0.1uA and smallest pulse current width of 33us satisfy customers’ measurement requirements. PPH-1503D has excellent transient recovery time, which can, in less than 40us, recover the output voltage to within 100mV of the previous voltage output. This differentiates PPH-1503D from general power supplies. While simulating battery output pulse current, PPH-1503D can quickly compensate the voltage drop caused by pulse current. CH1 has built-in battery simulation function, which can define output impedance setting so as to accurately simulate battery’s impedance characteristics during battery discharge. The internal high speed sampling circuit design lets PPH-1503D measure pulse current without using oscilloscope. PPH-1503D is not only suitable for simulating battery, charger and supplying power to DUT, but also ideal for simulating an electronic load to conduct discharge tests with its current sink capability. Long integration current measurement can be utilized to conduct average current measurement for periodical pulse current in a long period of time that is applied to analyze power consumption.

    Features:

    l   3.5 inch TFT LCD Display

    l   Built-In DVM Measurement Function

    l   High Measurement Resolution (1mV/0.1uA)

    l   Recovery time (<40us within 100mV, <80us within 20mV)

    l   Current sink function up to 3.5A

    l   Pulse current measurement (pulse width minimum at 33us)

    l   Long integration current measurement

    l   Sequence Function (Sequential power output)

    l   Built-in Battery Simulation Function

    l   OVP, OCP, OTP & temperature display for heat sink

    l   Support USB / GPIB / LAN

    l   5 groups of Save / Recall setting

    l   External relay control

    For more information, please visit http://www.gwinstek.com

  • PCS-1000I Isolated Output Precision Current Shunt
    PCS-1000I is an isolated output high precision current shunt meter. It provides 5 current measurement levels. PCS-1000I can be used in adjusting & calibrating instruments. It provides BNC output to connect directly with scope....

  • GW Instek Presents the PCS-1000I Isolated Output High Precision Current Shunt Meter

    PCS-1000I is an isolated output high precision current shunt meter. It adopts 5 sets of independent shunt resistors to provide 5 current measurement levels, including 300A, 30A, 3A, 300mA, and 30mA to meet the requirements of different current level measurements. Internally, PCS-1000I utilizes two sets of 24bits ADCs and low temperature coefficient electronic components to mainly focus on the current measurement of power supply devices. High precision PCS-1000I can be used in adjusting and calibrating instruments. Additionally, temperature variation will not cause PCS-1000I to yield any measurement errors. PCS-1000I can automatically select optimal measurement level with the maximum resolution so as to replace manual selection to save operational time. PCS-1000I provides a BNC output to connect with oscilloscope to directly observe current waveform variation without current probe. PCS-1000I’s isolated current output design can prevent measurement errors from an oscilloscope with non-isolated outputs. PCS-1000I, a high precision AC/DC current shunt meter, not only provides USB & GPIB communications interfaces for users to remotely control the instrument but also conducts simultaneous voltage and current measurements.

    Features:

    l   6 ½ Digit Voltage & Current Measurement Resolution

    l   Simultaneous Current & Voltage Measurement

    l   5 Current Measurement Levels (AC & DC): 30mA / 300mA / 3A / 30A / 300A

    l   AC Voltage Measurement Levels: 200mV / 2V / 20V / 200V / 600V

    l   DC Voltage Measurement Levels: 200mV / 2V / 20V / 200V / 1000V

    l   Standard: USB & GPIB

    l   CE Verification

    For more information, please visit http://www.gwinstek.com