Determine the dust collection method according to the type of dust.
(1) Floating dust
(2) Adhering dust
(3) Fume (smelly smoke and dust caused by laser marking etc.)
(1) Floating dust
To handle the light floating dust in the air, and prevent it from adheres to the product, the most effective method is to set up a suction port in the direction (above/below/side) where it floats, or removing it in an enclosed space.
CHIKO High Air Volume Type (CKU series etc.) products are most suitable in this situation.
(2) Adhering dust
Fine dust adhering to the product can be removed by small-diameter pipe and slit nozzle with high suction speed. For electrostatically charged dust, you can remove it with a combination of dust collector and air blow machine. Also, it is important to keep a short distance between the dust and the suction port.
CHIKO High-Pressure Type (CBA series etc.) products are recommended in this situation.
(3) Fume
For the extraction of odorous solder/laser marking fume, it is important to remove the fume and smell at the same time while preventing the filter from clogging by sticky fume.
With CHIKO's unique design, the filter loaded with zeolite powder can be used for a longer time without being easily clogged. Furthermore, dust collector with activated carbon filters can help deodorize.
In addition, the suction power of CHIKO dust collector will not decrease even the dust shaking mode is operating.
CHIKO Laser Clean Type (CBA-1000 series etc.) products are recommended in this situation.