Riverstone Resource

Lot 55&56, No. 13, Jln. Jasmin 2, Kaw. Perindustrian Bkt. Beruntung, Bkt. Beruntung
Selangor,  48300

Malaysia
http://www.riverstone.com.my
  • Booth: 2617


Welcome to Riverstone!. Our brand. Your choice!


 Press Releases

  • (20160529)

    Riverstone was established in 1991 and listed on the Mainboard of the SIngapore Stock Exchange in 2006.

    We specialize in th eproduction of Cleanroom and Healthcare Gloves, fingercots, cleanroom packaging bags and face masks. Over the years, with the full support of our valued customers and the commitment of our staff, we have grown to become the leading global supplier for Cleanroom and Healthcare Gloves.

    Our products are widely qualified and used by major global players in the hard disk drive ("HDD"), semiconductor and healthcare industries. We export more than 85% of our products to key high technology customers in Asia, the Americas and Europe.

    As a global supplier of Cleanroom and Healthcare Gloves, currently we have four manufacturing facilities, located in Malaysia, Thailand and China and established network of sales offices and strategic partners in Asia, the Americas and Europe.

  • Our focus on research and product development enables us to engage better in technical collaborative projects with our customers to deliver customized solutions.

    Our customers are major manufacturers in the HDD and semiconductor industries. The production and assembly of elctronics products in these industries demand exacting cleanroom standards for particle and static control in order to protect highly sensitive electronic components from contamination.

    Our Group has been involved in the manufacturing of cleanroom gloves for more than 24 years. We strive to create an environment rich in technological innovation and manufacturing excellence. Over the years, we have developed deep technical knowledge in formulation and process techniques. With the special formulation, we have become one of the world leaders to produce cleanroom gloves that meet customer's stringent requirement on ESD at all cleanroom cleanliness levels. While in accelerating our growth momentum, we were able to integrate automation processes such as glove-stripping in a more conducive environemnt. As we develop our niche in customizing products for our customers, we remain committed to value-add with new solutions. With our expanded facility, we partnered some of our customers and made arrangements to dedicate production lines for their orders on a long-term basis.

    As a testament to our high quality control and production standards, we have been accorded international manufacturing certifications:

    • ISO 9001:2008 Quality management system
    • ISO14001:2004 Environmental management sysytem
    • ISO 13485:2003 Quality management system for medical devices
    • Six Sigma Program
    • Certified OHSAS 18001 & MS 1722
    • SGS United Kingdom LTD System & Services Certification
    • Certified Directive 93/42/EEC for Sterile Nitrile Gloves
    • Registered US FDA 510(K) for medical devices.
    •  
  • Our company has adopted Six Sigma methodology since year 2002. This is a systematic approach to achieve customers' satisfaction. We focus on process control and implementing statiscal tools in analysis.

    LEAN MANUFACTURING

    • Reduce Lead Time
    • Increase Flexibility
    • Organize for Mass Customization
    • Collaborate with Engineering
    • Collaborate with Suppliers in Lead Time
    • Improve Quality and Reliability
    • Eliminate Waste

 Products

  • Cleanroom Nitrile and Latex Gloves
    RS Cleanroom Nitrile and Latex gloves symbolize superior quality. These products are produced with special formulation to meet the exacting standards for particle and static control that the HDD and electronics industry demand....

  • Cleanroom Nitrile Gloves

    Material : 100% pure Nitrile without plasticizers. Contain no Phthalates Esters, Silicone Oil and Amide.

    Process: Laundered with 0.2 micron filtered high resistivity DI water and packed in certified ISO 4 and ISO 5 cleanroom environment.

    Colour : Natural white & Natural Blue

     

    Cleanroom Latex Gloves

    Material : 100% pure Natural Latex without plasticizers. Contain no Phthalates Esters, Silicone Oil and Amide.

    Process: Laundered with 0.2 micron filtered high resistivity DI water and packed in certified cleanroom environment.

    Colour : Natural yellow

     

    Cleanroom Nitrile and Latex gloves are tested with our in-house state-of-the-art equipment. Our equipment is certified by our key customers through correlation process. Our quality control is done following international standards such as ASTM, IEST and ANSI. These products are also certified by FDA and Canadian General Standard Bureau (CGSB)

  • Cleanroom Packaging Bags
    RS Cleanroom Packaging bags are made of 100% virgin resins and manufactured in down to ISO 5 cleanroom to meet the stringent requirement.. Hence, they are highly recommended for packing of critical parts in HDD, semiconductor and electronics industries....

  • Cleanroom Packaging Bags 

    Our products are made of 100% virgin resin. They are free of Silicone Oil, Amide and DOP

    1.Cleanroom HDPE Bag

    a. Made from high quality 100% virgin resin

    b. This High Density Polyethylene bag provides low cost protection against particulate contaminationnfor componentsnwhich are not too sensitive to moisture and ESD.

     

    2. Cleanroom LDPE Bag

    a. Made from high quality 100% virgin resin.

    b. Free of Silicone Oil, Amide and DOP

    c. This Low DensityPolyethylene bag provides low cost protection against particulate contamination. For better ESD protection, anti-static LDPE is available.

    d. Transparent and come in many colors for easy identification of components

     

    3. Cleanroom Pre-opened and Perforated Bag

    a. This bag comes with perforated line suitable for auto-packing

    b. It makes packaging quick and easy

    c. Available in LDPE, HDPE and the blending of both materials

     

    4. Static Shielding Bag

    a. Suitable for packing electronics components

    b. Available with two-side seal to provide Faraday Cage effect

    c. Bags can be printed with ESD warning symbol

     

    5. Mosture Barrier Bag

    a. Designed for intended application requiring extra puncture resistance besides superior moisture barrier.

    b. Ideal for packaging with sharp edges such as  chip rails or disc caddies

    c. Conforms easily to the shape of products for vacuum packing.

     

     

     

  • Cleanroom Finger Cots and Face Masks
    RS Cleanroom finger cots and face mask are manufactured under strict process control. These products are free from Silicone oil, Amide and DOP, which are compatible to cleanroom requirement....

  • Cleanroom Finger Cots

    1. Nitrile Fingercot 

        Material : 100% pure Nitrile without plasticizers. Contain no Phthalates Esters, Silicone Oil and Amide.

        Process : Laundered with 0.2 micron filtered high resistivity D.I. water and packed in certified cleanroom environment

        Color : Natural white

        Product Types :-

           a. Rolled / Unrolled

           b. Cut Type

           c. Low Sulphur

    2. Latex Fingercot 

        Material : 100% pure Natural Latex without plasticizers. Contain no Phthalates Esters, Silicone Oil and Amide.

        Process : Laundered with 0.2 micron filtered high resistivity D.I. water and packed in certified cleanroom environment

        Color : Natural yellow

        Product Types :-

           a. Normal and Antistatic

           b. Antistatic Pink

           c. Good Grip

           d. Sulphur Free

     

    Cleanroom Face Masks

           1. This product is developed with silicone-free material.

           2. Most ideal for use in cleanroom

           3. Made of breathable fabric with efficient filtration and minimum particles generation

           4. Products are available in earloop, headloop, with elastic and PU bands and 4-ties

           5. Suitable to use in Semiconductor, TFT-LCD, electronics manufacturing lines, food industry and hospital


 Additional Info

New Exhibitor:
Yes
New Products:
Yes
Displaying Equipment:
No
Product Demonstrations:
Yes
Please indicate which segment(s) your company serves
LED/solid state lighting, MEMS, Power Semiconductors, Semiconductor, Water Processing, Packaging/Assembly

Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".