S.E.R. Corporation

1-14-8 Kitashinagawa
Star Building
Shinagawa-ku,  Tokyo  140-0001

Japan
http://www.ser.co.jp
  • Booth: A4148


Welcome to SER corporation


 Press Releases

  • SER has started to run a new factory for spring probe pins. Our probe pins are Japan manufacturing.
    Capacity is 15KK/year. Probe diamter down to 100um, customized and made by fully automatic assembly and 100% inspection.
     Visit our booth to ask more details.

 Products

  • ◆ SER Signal Probe Socket◆
    Best suitable on needs for actual signal evaluation of High Speed LSI...

  • High-speed signal probe socket has composed with signal probe base socket, lid and alignment frame. Signal probe base socket must be adjusted and located on an application PCB by alignment frame.LSI for waveform check and signal probe or measurement must be loaded to signal probe base socket and be fixed by lid. Actual signal or waveform will be checked from a land terminal on signal probe interposer board composed in signal probe base socket.
  • ◆SER Complete coaxial probe socket◆
    Coaxial Z0=50 Ω Probe Contact Structured IC Socket...

  • To keep Z0=50Ω signal transmission line through IC socket contact path from PCB land to IC lead terminal, IC socket is designed complete Z0=50Ω coaxial robe contact structure which achieve more than 60 GHz frequency bandwith at -1.0dB insertion loss. It is best suitable for LSI evaluation, inspection and testing. This coaxial IC sokcet is available for 1.0mm, 0.8mm, and 0.5mm pitch contact matrix.
  • ◆SER High Density Coaxial B to B Connector◆
    It has suitable Board to Board connections for high frequency ・5G Net Radio for Massive-MIMO ・Superior signal integrity up to 39GHz ・Connect to RF modules, Phased Array modules ...

  • 【 Features 】

    ・Compression mount

       Solderless system eliminates signal distortion for clean signal integrity

    ・High durability (50k+ mating cycles)

    ・Wide temperature Lange (-40~+150℃) and High vibration resistance.

    ・Available 100channels for 0.8mm contact pitch at 100㎜²

    ・Customized design available (please consult)

    ・Screw clamp operation for easy-to-remove B to B connector and reuse


Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".