HTT High Tech Trade GmbH

Landsbergerstraße 428
Munich,  D-81241

  • Booth: B1101

Live Demos of brand new products and daily happy hour!

htt Group product range includes products from: Cyberoptics, Aehr Test Systems, TPS, QES, MPI Thermal, Fancort, IS-Test, MPI Probe Cards, Johnstech, 3S Korea, MarTek, Tesec, Japan Unix, Jenoptik, TurboDynamics, Hisol, ThermoKeyTek, ITS, IOSS, MSP, STI Singapore, Bridge & Mechatronic. We welcome you to see their latest news and answer all your questions at our booth.

htt GROUP is a privately owned company, putting its main focus on the Semiconductor Industry, seperated into the following divisions:

- Wafer Reader Division: offering IOSS WID120 Wafer ID Reader, the new standard Wafer ID Reader for OCR, Barcode, DataMatrix Codes, designed in Germany and mBWR200 Batch Wafer Reader

- Equipment Division offering various capital equipment products like Wafer Prober, Tester, Temperature Cycling Systems, Sorters, Handling Tools etc.

- its own Probe Card Division providing 'made in Germany' Cantilever Probecards, most of them custom made and Advanced Probecards by MPI PC Division. ( including European Repair Center in Dresden) as well as optical Probecards from Jenoptik

- Service and CE Division offering maintenance, installations and CE-confirmations with our team of 5 service engineers.


  • IOSS WID120 Wafer ID Reader
    The longer it works, the faster it gets....

  • New benchmarks:

    - Revolutionary integrated RGB illumination 

    - Fully automatic exposure control

    - Code-Shift-Compensation

    - High and fast reading rates

    - Intelligent configurations handling

    - Precise fine tuning

    - Additional external RGB light source

    OCR, Barcode, DataMatrix and QR code

    Easy graphical user interface, w/ teach-in


    Easy integration

    Best Cost of Ownership

    - Achieve highest yield

    - Increase of MTBA/MTBF

    - Decrease of MTTR

  • MPI Probercards Vertical Osprey
    The Osprey probe card is MPI’s solution to demand for ever finer pitch....

  • Osprey is designed for smaller Al pad, and is ideal for tiny pitch application with peripheral and full array (conditional) pattern. The forming wire (FW) type needle produced with MPI’s own micro fabrication process not only delivers high-quality performance but also allows easy needle replacement.

    Key features:

    - Suitable for pad size < 35μm

    - Best for pitch between 40 ~ 70μm

    - Wire type needle for easy replacement

    - Needle coating by MEMS process

    - Force down to 1.5gf.

  • MPI Thermal Air TA-5000A-HT
    Performance Plus! - Productivity!...

  • - Continuous Air Flow up to 25 SCFM @-80°C / +300°C
    - -55°C to +125°C / +125°C to -55°C less than 10 sec
    - Ultra Stable DC Temperature Control
    - Frost Free Operation / Built-in Air Dryer
    - No LN2 or CO2 Required
    - CFC Free / CE Mark

    - Two User Touch Screen Displays on the Head & Front
    - USB & SSD Thermal File Management & Data Logging
    - Easy Roll Around wheels for portability
    - Plug-in Anywhere 185 to 250 VAC, 50/60Hz
    [No configuration required]

  • MPI Thermal Air TA-3000A
    Flexible Temperature Testing & Thermal Cycling ...

  • The ThermalAir temperature products are a series of high capacity thermal air stream systems that are used for temperature testing, fast thermal cycling and device temperature characterization of components, hybrids, modules, PCBs, and other electronic and non-electronic assemblies at precise temperatures from -65°C to +225°C

    System Performance

    Airflow: Continuous Air Flow up to 16 SCFM @-65°C / +225°C

    -40°C to +125°C / +125°C to -40°C in Less Than 10 sec

    Temperature Control: Environment Air or External DUT sensing directly at the DUT case to ±1.0°C

    Temperature control Sensor Ports: Type T or Type K thermocouple (2x Rear), and 100 ohm RTD

    Temperature set, display and resolution: ±0.1°C

    Temperature Accuracy: ± 1.0°C (calibrated system)

    Remote interface ports: Four: IEEE-488, RS232, SOT/EOT/SFF, 4 USB-Type A, 1 USB-Type B, LAN, PLUS Auto Start Test & End of Test for automatic temperature cycling Hot-Cold-Amb.
    All this makes for simple control and service ability.

  • Fancort Industries F1B/3A
    Our most versatile and adjustable one-sided SMT Lead Forming System. This unique tooling system includes an adjustable tie bar cutter and an adjustable former in one system....

  • The system allows the removal of tie bars from most flat packs and quads and also adjusts any dimension on an SMT form including the foot dimension. This unit is an excellent entry level machine and is perfect for short to medium high quality production runs and R&D.

    There are three standard versions of this system Custom systems will be quoted as requested.

    F-1B/3A a standard tool that can handle parts up to 2-1/2" x 2-1/2" with a body thickness maximum of .150 above and below the forming lines

    F-1B/3A/SP a special tool that can handle parts up to 2-1/2" x 2-1/2" with a body thickness maximum of .280 above and below the forming lines to thandle thick packages

    Shown in an optional 5000L air press

    F-1B/3A tool close up, shown with NEW Titanium Nitrite rust proof plating

    F-1B/3A-4 a large tool that can handle parts up to 4" x 4" with a body thickness maximum of .150 above and below the forming lines

    Adjustable Foot

    Put gullwing forms on almost any flat package 2 or 4 sided, changing all dimentions

    Adjustable back stop with linear slide holds package cases parallel for accurate registration

    All models process top-brazed, side-exit or bottom-brazed packages with optional parts

    Digital Micrometers" on all tools, which can be switched from inch to metric and zero'd for easy recalibration and/or resetting by the operator.

    Easy to change die members for large variations in lead material thickness, hardness, or shape

    One-sided processing on two stations; trim first, then form.

    Infinitely variable foot length

    The adjustable cutting station has the ability to remove tie bars and or tie bar corners on most quad packs

    Process packages up to 2.5" long standard, 4" on larger model

    Variable standoff, shoulder, material thickness and heel radius. See drawing for details.

    Plated to prevent rusting

    Bench air press, or each station can be mounted in a 3300 hand press.

  • MPI Probercards Vertical EVS
    The EVS Probe Card is an enhancement over the conventional bucking beam probe card. Key features are higher C.C.C. and lower force. EVS can easily meet the requirement of advanced wafer probing....

  • Precise alignment and excellence planarity control are the key factors contributing to stable contact resistance. With its capacity and performance, EVS Probe Card is an ideal choice for advanced probe cards.

    Key features:

    - Available in both flat and pointed tip

    - Leave smaller probe mark on the DUT

    - Force down to 3.4gf.

    - C.C.C. up to 1450mA

    - Longer lifetime benefits from longer tip length


Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".