HTT High Tech Trade GmbH

New benchmarks:

- Revolutionary integrated RGB illumination　

- Fully automatic exposure control

- Code-Shift-Compensation

- High and fast reading rates

- Intelligent configurations handling

- Precise fine tuning

- Additional external RGB light source

OCR, Barcode, DataMatrix and QR code

Easy graphical user interface, w/ teach-in

wizard

Easy integration

Best Cost of Ownership

- Achieve highest yield

- Increase of MTBA/MTBF

- Decrease of MTTR

Osprey is designed for smaller Al pad, and is ideal for tiny pitch application with peripheral and full array (conditional) pattern. The forming wire (FW) type needle produced with MPI’s own micro fabrication process not only delivers high-quality performance but also allows easy needle replacement.

Key features:

- Suitable for pad size < 35μm

- Best for pitch between 40 ~ 70μm

- Wire type needle for easy replacement

- Needle coating by MEMS process

- Force down to 1.5gf.

- Continuous Air Flow up to 25 SCFM @-80°C / +300°C
- -55°C to +125°C / +125°C to -55°C less than 10 sec
- Ultra Stable DC Temperature Control
- Frost Free Operation / Built-in Air Dryer
- No LN2 or CO2 Required
- CFC Free / CE Mark

Flexibility
- Two User Touch Screen Displays on the Head & Front
Panel
- USB & SSD Thermal File Management & Data Logging
- Easy Roll Around wheels for portability
- Plug-in Anywhere 185 to 250 VAC, 50/60Hz
[No configuration required]

The ThermalAir temperature products are a series of high capacity thermal air stream systems that are used for temperature testing, fast thermal cycling and device temperature characterization of components, hybrids, modules, PCBs, and other electronic and non-electronic assemblies at precise temperatures from -65°C to +225°C

System Performance

Airflow: Continuous Air Flow up to 16 SCFM @-65°C / +225°C

-40°C to +125°C / +125°C to -40°C in Less Than 10 sec

Temperature Control: Environment Air or External DUT sensing directly at the DUT case to ±1.0°C

Temperature control Sensor Ports: Type T or Type K thermocouple (2x Rear), and 100 ohm RTD

Temperature set, display and resolution: ±0.1°C

Temperature Accuracy: ± 1.0°C (calibrated system)

Remote interface ports: Four: IEEE-488, RS232, SOT/EOT/SFF, 4 USB-Type A, 1 USB-Type B, LAN, PLUS Auto Start Test & End of Test for automatic temperature cycling Hot-Cold-Amb.
All this makes for simple control and service ability.

The system allows the removal of tie bars from most flat packs and quads and also adjusts any dimension on an SMT form including the foot dimension. This unit is an excellent entry level machine and is perfect for short to medium high quality production runs and R&D.

There are three standard versions of this system Custom systems will be quoted as requested.

F-1B/3A a standard tool that can handle parts up to 2-1/2" x 2-1/2" with a body thickness maximum of .150 above and below the forming lines

F-1B/3A/SP a special tool that can handle parts up to 2-1/2" x 2-1/2" with a body thickness maximum of .280 above and below the forming lines to thandle thick packages

Shown in an optional 5000L air press

F-1B/3A tool close up, shown with NEW Titanium Nitrite rust proof plating

F-1B/3A-4 a large tool that can handle parts up to 4" x 4" with a body thickness maximum of .150 above and below the forming lines

Adjustable Foot

Put gullwing forms on almost any flat package 2 or 4 sided, changing all dimentions

Adjustable back stop with linear slide holds package cases parallel for accurate registration

All models process top-brazed, side-exit or bottom-brazed packages with optional parts

Digital Micrometers" on all tools, which can be switched from inch to metric and zero'd for easy recalibration and/or resetting by the operator.

Easy to change die members for large variations in lead material thickness, hardness, or shape

One-sided processing on two stations; trim first, then form.

Infinitely variable foot length

The adjustable cutting station has the ability to remove tie bars and or tie bar corners on most quad packs

Process packages up to 2.5" long standard, 4" on larger model

Variable standoff, shoulder, material thickness and heel radius. See drawing for details.

Plated to prevent rusting

Bench air press, or each station can be mounted in a 3300 hand press.

Precise alignment and excellence planarity control are the key factors contributing to stable contact resistance. With its capacity and performance, EVS Probe Card is an ideal choice for advanced probe cards.

Key features:

- Available in both flat and pointed tip

- Leave smaller probe mark on the DUT

- Force down to 3.4gf.

- C.C.C. up to 1450mA

- Longer lifetime benefits from longer tip length