New Cosmos - BIE

A suction type detector for indoor use. Sensor cartridges are factory calibrated and delivered to site ready for use.

Features:

- Sensor units are already calibrated and only need zero check and operation checks after being replaced.
- Sensor units and pumps with gas flow path can be replaced without tools.
- Analog 4-20mA output and relays
- Optional communication module for DeviceNet interface or PoE, ModBus/TCP.

Detectable gases:

Silane (SiH4) 5/25ppm Phosphine (PH3) 1ppm Diborane (B2H6) 500ppb Arsine (AsH3) 250ppb Hydrogen selenide (H2Se) 250ppb Disilane (Si2H6) 25ppm Dichlorosilane (SiH2Cl2) 25ppm Germane (GeH4) 1ppm Ammonia (NH3) 100ppm Hydrogen fluoride (HF) 10ppm Phosphorus trifluoride (PF3) 10ppm Hydrogen chloride (HCl) 5/25ppm Hydrogen bromide (HBr) 10ppm Fluorine (F2) 5ppm Dichlorine (Cl2) 5ppm Chlorine trifluoride (ClF3) 1ppm Ozone (O3) 1ppm Carbon monixide (CO) 250ppm Hydrogen sulfide (H2S) 50ppm Nitrogen trifluoride (NF3) 100ppm Carbon tetrachloride (CCl4) 100ppm Hydrogen (H2) 500/1000ppm Oxygen (O2) 25vol%

The sensors are kept under power in a so-called sensor stocker. The stocker can keep up to 6 sensor cartridges. I case of an alarm in your cleanroom, take the sensor your need to approve that there is a real leak in your clean room.

The detector is battery powered and is portable.

The NEW XPS-7 II now also includes the detection of Nitrogen trifluoride (NF3)

For gas leak inspection and concentration measurement at semiconductor factory where there is toxic gas.

Features:

• Gas detector for semiconductor manufacturing gases, like Hydrogen Sulfide (H2S), Arsine (AsH3), Ammonia (NH3), Chlorine (Cl2), Nitrogen trifluoride (NF3), Silane (SiH4)etc.

• Detects a range of gases with a Single-gas Detector by replacing the Sensor Unit

• Easy to remove sensor unit and insert new sensor unit

• Sensor stocker available for storage of maximum 6 sensors

Detectable gases:

Features:

• The ePACT Controller consist of easy to use ePACT configuration software to configure the system to your needs

• Designed for small, medium to large size gas detection systems

• Modular set-up for flexible I/O configuration

• Easy expandable via internal I/O modules or remote cabinets

• Expansion and configuration is done in live systems. No need to reboot, no down-time of your safety system

• Full control over the entire system • The ePACT (Ethernet Programmable Active Configuration Tool) software is equiped with real time visualisation of the gas detection system available via multiple (remote) displays

• Each display can be configured to show dedicated detector signals and will automaticaly scale to the resolution of your screen

• The ePACT Controller is fully compatible with the SIMS-NX visualisation software for real time and historical sensor data via trendview, eventlog and maps.

• Support of SH-WAD, PS-7M and other I/O protocols