he talos platform, basing on a 4-axis portal, may be adapted to a virtually unlimited variety of customer demands – we will be pleased to design a concept for you, customized to your individual requirements.

workflow

• step 1
  loading device pick-up from assigned input tray/tube/tape 
• step 2
  pre-alignment device placement in and re-pick from pre-centering unit 
• step 3
  placing z1-axis places device in contact socket
• step 4
  contacting z2-axis with active temperature control plunger presses device into contact socket and adjusts it to test temperature 
• step 5
  unloading after device testing, separation in assigned output trays/tubes/tapes, depending on test results (BIN class)

system key features

• reliable and easy-to-use device handling system
• -60 °C to +175 °C (-76 °F to +347 °F) device testing temperature with active thermal control system (ATC)
• for cold/hot tests → tri-temp testing
• multiple test cycles at different test temperatures without user interaction
• in combination with esmo phoenix cart, lowest test cell footprint in the market
• kitless test handler OR customized handling system, with modular system configurations as per individual
• requirements and the intended use
• easily moveable, even by one person
• standard docking interface for all testers
• remote control via Ethernet
• high MTBF values, low maintenance efforts
   

handling key features

• highly accurate and reliable 4+1-axis portal pick-and-place robot system
• manual tray/tube/tape loading and unloading options
• free pin1 orientation
• high contact force of 450 N – higher contact force of up to 800 N available on request
• 15.6" widescreen HMI with multi-touch capability
• integrated camera system for pick-and-place position teaching
• FIFO or BIN sort mode with free tray/tube assignment
• software-supported tray/tube/tape resorting feature
• RS232 or optional TCP/IP or GPIB tester interfaces

optional features

• taper (tape output)
  for hot/cold sealing with adjustable sealing force feature
• tray stacker
  for automatic loading/unloading operations with trays
• z2 with contact force control feature
  for direct measuring during contacting
• junction control (JC) + power dissipation compensation (PDC)
  for direct read-out, temperature control and compensation
• temperature control
  active thermal control (ATC) option
• cooling options
  electrical air chiller I dual electrical air chiller I LN2 heat exchanger I hybrid chiller
• tube loading/unloading
  for manual loading/unloading operations with tubes
• tray loading/unloading
  for manual loading/unloading operations with standard trays
• dual ionizer
  closed-loop ionization for input/output area to protect sensitive parts from damage due to electro-static discharge
• code reader
  for identifying codes on ICs and assigning them to their corresponding test results
• vacuum generator
  vacuum is required for component pick+place (in case no external vacuum supply will be provided)
• air dryer unit
  for cold test operations to prevent chiller/heat exchanger icing as well as for chamber purge (in case no dry-air supply will be provided)
• external signal/status light
  in addition to the standard, internal multi-color status LED illumination
• BIB cleaning
  facilitate, shorten, and enhance your cleaning processes
• vision alignment
  vision system option for small-device contact position correction (x/y/phi)

All esmo semicon products are available with standardized features for integration into most varied test floor environments, engineering, wafer sort, and final test, with all test system and mating equipment types. At request, they may be equipped with optional features for specific test cell and mating equipment demands.

esmo design specialists develop individual solutions for the adaptation and integration of test head manipulators and mechanical interfacing systems into test cells for both front- and back-end testing.

Based on an extensive determination and definition of requirements in cooperation with customers, esmo semicon provides a comprehensive service portfolio: from the selection of suitable equipment to completely new designs in order to create optimized and highly efficient test cells.

Our objective: to provide you with a customized system, precisely as per your requirements and demands, for increased utilization rates, an enhanced ease of use and operation as well as sustainable safety – thus, with this maximum of efficiency and profitability, a clear added value for your business.

esmo semicon designs ideal solutions for each designated purpose!

key features

• up to 400 kg (881 lbs) load capacity
• cost-efficient manual solution
• high-grade components
• slim design
• single-arm concept
• stand-alone footing version – standard feature
• symmetric design for accessibility from all sides
• adjustable fork arm width, depending on test head configuration
• twist axis gear box with indexing bolt
• tumble lock sag-control feature
• numerous additional, unique features for individual set-up requirements

optional features

• tumble gear box
• linear footing version – easy-to-handle foot brake
• server base platform version with linear rails
• motor-assisted z-axis motion (true linear motion feature)
• active cable management for optimized cable handling

All esmo semicon docking and interfacing products offer standardized features for integration in any conventional handler, prober, and tester types. At request, they may also be equipped with optional features – direct-dock solutions will be available as well.

esmo semicon design specialists develop individual solutions for the adaptation and integration of test head manipulators as well as docking and interfacing systems into test cells for both front- and back-end testing.

Based on a thorough determination and definition of requirements in cooperation with customers, esmo semicon provides comprehensive services: from the selection of appropriate equipment to completely new designs in order to achieve optimized and highly efficient test cells.

Our objective: to meet the challenges of today's complex tester/probe card interface applications both in terms of performance and operation, and provide you with a customized system, precisely as per your requirements and demands, for increased utilization rates, an enhanced ease of use and operation as well as sustainable safety – thus, with this maximum of efficiency and profitability, a clear added value for your business.

esmo semicon develops custom-fit solutions for each designated purpose!

key features

• teach-in functionality
• autonomous intercommunication with other modules
• integrable into more complex systems
• revolutionary electrical operation functions
• highest repeatability
• 1-button operation
• repeatability of +/- 20 µm in z-axis
• repeatability of +/- 25 µm in x- and y-axes
• 4 kN docking force
• electrical synchronization of docking modules
• touch panel with z-position teaching feature
• individual positioning of each docking module
• 8 mm adjustment of z-position range
• zero risk of collision with docked board
• durable and robust design
• cost-/time-saving operation
• pin-catch feature in pre-docked position
• flattest electrical docking solution in the market
• compatible with great variety of test head solutions
• compatible with great variety of handler/prober solutions
• facilitated installation with esmo semicon lupo cart