Loading...

Creative Technology Corporation

1-11-33 Kamisakunobe
Takatsu-ku
Kawasaki-shi, Kanagawa,  2130034

Japan
https://creative-technology.co.jp/
  • Booth: C2118


Cutting-edge Electrostatic Chucking System with Sensor

Creative Technology Corp. have been manufacturing and developing Electrostatic Chucks (ESC) and Heater with own developed sensor for Semiconductor process. CT Corp. has over 20 years experience in the semiconductor industry and supplies to device makers across the globe including Japan, Taiwan, Korea, China, Europe, Singapore and the USA. CT Corp. also actively keeps up with next-generation technologies including chucking system for etching, CVD, PVD, TSV Litho with capacitance sensor, chucking system for end effector without vacuum, multi-zone heater and so on.


 Press Releases

  • In the semiconductor field, with the miniaturization and sophistication of electronic devices such as personal computers, tablets, and smartphones, there is a demand for smaller, higher-quality semiconductor devices. Naturally, the circuits that determine the performance of devices are becoming more miniaturized, so particles (foreign objects) at the level of “several nanometers,” which were not considered a problem in the past, have become a major problem in recent years.

    Here, I would like to introduce three of our original particle countermeasures.

    1. Particle Collector 

    The “Particle Collector” proposed by Creative Technology is a tool that captures particles (foreign objects) in space and specializes in particle countermeasures by applying the “Electrostatic Chuck” technology that we have cultivated over many years in the semiconductor field. You can install it on the load port, load lock, transfer chamber, exposure system, and other components to reduce equipment downtime and increase productivity. 

    More information: https://creative-technology.co.jp/products-e/particle-collector/  

    2. IonPad 

    The "IonPad" is a tool composed of a special resin coating and a base material, designed to generate Van der Waals forces (intermolecular forces) at the interface between the IonPad and the wafer. When installed on transfer arms, our IonPad enhances the accuracy of handling not only flat wafers but also warped wafers. Moreover, by gripping the wafer with minimum contact on the backside, it also helps reduce particle contamination caused by contact with the transfer arm, serving as an effective particle countermeasure.

    More information: https://creative-technology.co.jp/products-e/ionpad/

    3. eRaser Disk 

    The presence of particles on the pin chuck or electrostatic chuck, which is the processing stage, can cause process errors and equipment shutdowns. In general, particles are removed by in-line cleaning (dummy run) using a dummy wafer, but for particles that cannot be removed even with a dummy run, the equipment is stopped, and manual cleaning work is performed. However, the reality is that it takes a lot of time to recover the equipment. To overcome this situation, we have developed the "eRaser Disk" as an in-line stage cleaning tool for semiconductor manufacturing equipment. By coating the silicon wafer with a special resin, the particle removal performance is improved, contributing to the reduction of dummy run time and the frequency of equipment shutdowns.

    More information: https://creative-technology.co.jp/products-e/eraser-disk/

  • eRaser Disk 

    The presence of particles on the pin chuck or electrostatic chuck, which is the processing stage, can cause process errors and equipment shutdowns. In general, particles are removed by in-line cleaning (dummy run) using a dummy wafer, but for particles that cannot be removed even with a dummy run, the equipment is stopped, and manual cleaning work is performed. However, the reality is that it takes a lot of time to recover the equipment. To overcome this situation, we have developed the "eRaser Disk" as an in-line stage cleaning tool for semiconductor manufacturing equipment. By coating the silicon wafer with a special resin, the particle removal performance is improved, contributing to the reduction of dummy run time and the frequency of equipment shutdowns.

    More information: https://creative-technology.co.jp/products-e/eraser-disk/

  • IonPad 

    The "IonPad" is a tool composed of a special resin coating and a base material, designed to generate Van der Waals forces (intermolecular forces) at the interface between the IonPad and the wafer. When installed on transfer arms, our IonPad enhances the accuracy of handling not only flat wafers but also warped wafers. Moreover, by gripping the wafer with minimum contact on the backside, it also helps reduce particle contamination caused by contact with the transfer arm, serving as an effective particle countermeasure.

    More information: https://creative-technology.co.jp/products-e/ionpad/


 Products

  • eRaser Disk(Cleaning wafer) by Creative Technology
    An eRaser Disk as an in-line stage cleaning tool for semiconductor manufacturing equipment....

  • Semiconductor manufacturing equipment is an extremely expensive facility, and an unplanned shutdown of the equipment will not only reduce production but also cause significant economic losses. In particular, the presence of particles on the pin chuck or electrostatic chuck, which is the processing stage, can cause process errors and equipment shutdowns. In general, particles are removed by in-line cleaning (dummy run) using a dummy wafer, but for particles that cannot be removed even with a dummy run, the equipment is stopped, and manual cleaning work is performed. However, the reality is that it takes a lot of time to recover the equipment.

    To overcome this situation, Creative Technology has developed an eRaser Disk as an in-line stage cleaning tool for semiconductor manufacturing equipment. By coating the silicon wafer with a special resin, the particle removal performance is improved, contributing to the reduction of dummy run time and the frequency of equipment shutdowns.


Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".