MSP, a Division of TSI

5910 Rice Creek Pkwy
Ste 300
Shoreview,  MN  55126-5028

United States
https://tsi.com/electronics-manufacturing/
  • Booth: B0722


TSI® & MSP, a Division of TSI®, greet you at SEMICON Europa!

MSP, a Division of TSI, delivers specialized technologies for the semiconductor industry, including advanced contamination control, wafer inspection, and precision liquid delivery systems. MSP products are widely adopted in CVD, ALD, and other critical process applications for their accuracy, reliability, and ultra-clean performance. Co-exhibiting with TSI Incorporated, headquartered in Minnesota, USA, who is a global leader in precision measurement solutions supporting semiconductor, electronics, pharmaceutical, and advanced manufacturing industries. Since 1961, TSI has been developing high-performance instruments that help improve product quality, process control, and yield. ________________________________________ Discover the Future of Semiconductor Innovation • Nanoparticle Monitoring in Ultrapure Water — TSI Nano LPM™ System for true 10 nanometer (nm) nanoparticle detection in semiconductor ultrapure water (UPW) • Parts Cleanliness Testing — Ensure reliability with precise cleanliness evaluations down to 2 nm • Particle Detection in High-Purity Gases — Reliable and repeatable measurements down to 2 nm • Airborne Particle Monitoring in Cleanrooms — Advanced systems for monitoring airborne particles as small as 10 nm • Vapor Delivery Solutions — Optimize thin-film deposition with our advanced Direct Liquid Injection (DLI) tools • Calibration Standards — Support for surface scanning and inspection tool calibration down to 10 nm • CMP Slurry Analysis — Gain single-particle insights for precise slurry size distribution. • Particle Removal Efficiency (PRE) Challenge Wafers — Validate particle removal efficiency with confidence. Visit us to explore our advanced solutions for precision, quality control and reliability in semiconductor manufacturing to ultimately increase yield.


 Products

  • MSP Turbo II™ Vaporizers
    <p>MSP offers a complete line of vaporization products for liquid source vaporization in gas-phase processing, such as Chemical Vapor Deposition (CVD) and Atomic Layer Deposition (ALD).</p><p>The Turbo II™ Vaporizers are designed to vaporize a wide range of liquids, including thermally sensitive and low vapor pressure substances, ensuring versatility and efficiency in thin film deposition processes. Achieve stable processes for reliable results, increase deposition rates for higher throughput, and lower ownership costs with minimal customer issues.</p>...

  • MSP Turbo™ Liquid Flow Controller (LFC)
    <p>The MSP Turbo™ Liquid Flow Controllers (LFC) enhance semiconductor thin film deposition processes like CVD, PECVD, ALD, and MOCVD.</p><p>Engineered to work seamlessly with MSP Turbo II™ Vaporizers, they ensure reliable and high-performance liquid vapor delivery. Key benefits include accelerated processes with reduced liquid waste, enhanced process stability for consistent results, shortened R&D timelines, and straightforward integration into existing control systems.</p>...

  • Vapor Process Gas (VPG) Filters
    <p>MSP’s Vapor Process Gas (VPG) Filters are crucial components in vaporizing systems, effectively removing nanometer and micron-sized particles from gas/vapor mixtures used in ALD and CVD applications.</p><p>Positioned downstream of vaporizers under vacuum flow conditions, these filters minimize the risk of condensation and gas phase conversion, ensuring only purified vapors enter the deposition process. They offer enhanced particle capture efficiency, thermal resistance, and when heat-wrapped, act as secondary heat exchangers to vaporize liquid contaminants, thereby optimizing system performance and reliability.</p>...

  • MSP Particle Deposition Systems
    <p>MSP's Particle Deposition Systems set the benchmark for wafer inspection and metrology. It enhances the yield of cutting-edge devices and meets today’s measurement requirements.</p><p>The systems deposit PSL spheres, MSP’s NanoSilica™ Size Standards, and SiO2 particles, producing precise and reliable contamination standards with SI traceability. These standards calibrate and qualify wafer inspection tools for semiconductor manufacturing.</p><p>Particle size and count are precisely controlled, ensuring consistent contamination standards across substrates. The 2300G3 also uses MSP Process Particles™ suspensions to evaluate tool response to defect-related material variations.</p><p>Applicable to All Models:<br />Particle Types: PSL spheres/MSP NanoSilica™ Size Standards/MSP Process Particles™ Suspensions<br />Particle Size Range: 10-2,000 nm/20-2,000 nm/30-2,000 nm, DMA-classified<br />Particle Size Accuracy: ±0.5 nm (Dp ≤ 50 nm), ±1% of peak diameter (Dp > 50 nm)<br />(Not including uncertainty intrinsic to the particle reference materials used for calibration of the DMAs.)</p>...

  • Particle Removal Efficiency (PRE) Challenge Wafers
    <p>PRE Challenge Wafers are an affordable solution for Particle Removal Efficiency (PRE) testing resulting in reliable cleaning system validation.</p><p>PRE Challenge Wafer Sets provide dry depositions of NanoSilica™ or PSL particles, guaranteeing precise size distributions and compositions. These substrates are uniformly deposited, enabling consistent testing and tuning of your cleaning systems to ensure accurate performance assessments. Achieve uniform and reliable depositions crucial for validating the efficiency of your cleaning processes in semiconductor manufacturing, safeguarding against defects and optimizing productivity and yield.</p>...

  • MSP Particle Size Standards
    <p>To ensure accurate calibration of your surface scanning equipment or particle counters, it's essential to use reliable particle suspensions. These standards consist of solid particles with specific size ranges and concentrations suspended in ultra-pure water (UPW). The suspension is then dispersed into clean air or nitrogen and deposited onto wafers and photomasks in precise patterns and sizes.</p><p>Particle Size Standards are crucial for creating high-quality calibration benchmarks, essential for calibrating, qualifying, and monitoring the performance of wafer and photomask inspection systems.</p>...


Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".