DCSENG CO., LTD.

Cheongju-si, Chungcheongbuk-do, 
Korea (South)
http://www.dcseng.co.kr
  • Booth: B834


DCSENG has made S-Cutter exclusively used for pipelines.

Founded by young founder who cherishes the dream of "technological development based on respect for humans and environment-centeredness," DCS (Dream, Challenge, and Success) ENG has made S-Cutter exclusively used for pipelines.

We believe that our convenient and efficient system that can freely meet any standards and materials with features necessary for pipeline installation work such as cutting, beveling, and prefab welding will fascinate you.

Our clean and comfortable working conditions for the safety of users and quick and precise workmanship will help raise competitiveness of companies. In addition, we will present an alternative to supply drinkable water in a clean and safe manner and take the lead in increasing profitability and protecting expensive equipment in industries.

We will continue our effort to become your partner that can help you step forward for your dream.


Thank you.


 Press Releases

  • 안녕하세요.

    파이프 커팅 및 베베링 장비 전문 디씨에스이엔지 입니다.

    이번 세미콘 코리아 전시회 때 저희 디씨에스이엔지가 다양한 제품들로 인사드릴 수 있게 되었습니다.

    항상 보시던 세계 최고의 파이프 커팅 및 베베링 장비 'S-Cutter'뿐만 아니라, 신 제품들도 소개드릴 예정입니다!

    자세한 제품은 전시회 당일 저희 디씨에스이엔지 부스, B834에서 확인 가능합니다~

    추가로 세미콘 코리아 매거진에 디씨에스이엔지 이야기가 게재되었습니다.

    아래 링크를 통해서도 확인이 가능하니, 많은 관심 바라겠습니다^^

    http://www.thelec.kr/news/articleView.html?idxno=349

    이번 전시회를 통해 또 한번 인사드릴 수 있기를 바라며, 전시회 때 뵙겠습니다!

    감사합니다.


 Products

  • S-LT Series
    * The most cost-effective orbital cutting machine! - Maximizing the user convenience - Equipped with a BLDC motor - Clamping O.D 6mm - 220mm at once - Capacity: 1/4'' - 8'' (Pipe O.D 6㎜ - 220㎜) - Pipe wall thickness Maximum 8.2mm ...

    • Maximizing the user convenience

        - Easy to replace cutting blades

        - Effective and convenient when processing short pipes

        - Possible to cut elbows

        - Mounted with a basic stopper for cutting and beveling

        - Maximizing the convenience of repeatitive work

    • Optimally designed for the processing of thin pipes

        - Pipe deformation is minimized.

        - Minimum distances are secured between cutting & beveling blade and vise (fixed jaw).

    • Possible to finely tune processing depths

        - Improving the quality in cutting and beveling

        - A single touch adjustment device

    • Clamping of O.D 6mm - 220mm at once

        - No need for an auxiliary vise (vise jaw)

        - Shortening the working hours

    • Equipped with a BLDC motor

        - Providing stable torques of all the ranges and ensuring high reliability.

        - Adjusting speed according to work types with a 6-stage control.

        - With a built-in overload protection circuit.

    • Applying oilless bearing to the main shaft

        - The durability of the equipment is improved.

        - The clearance of the equipment is minimized.

  • S-150
    Cut, whether thick or thin, at a single stroke! - Maximizing the user convenience with automatic rotation - Newly developed orbital type - Capacity : 1/4'' - 6'' (Pipe O.D 5mm - 170mm) Pipe wall thickness maximum 12mm...

    • Maximizing user convenience with automatic rotation

        - Thick pipes are cut in right direction and beveled

        - Thin pipes are cut in reverse direction (spiral duct cutting available)

    • Clamping at once from O.D 6mm to 170mm
    • Newly developed orbital type

        - Axial motor mounted onto the body (to prevent the spatter while working)

        - Semi-permanent design for Anti-backlash

    • Free adjustment of blade while cutting and beveling is possible
  • S-500
    * Necessary for stainless piping work! - The world's first pipe-rotation cutting method applied machine - Minimizing the eccentricity while cutting and beveling - Capacity : 3/8'' - 20'' (Pipe O.D 16mm - 510mm) Pipe wall thickness maximum 10mm...

    • Maximizing user convenience with automatic rotation
    • Possible to cut and bevle from 16mm to 510mm with one machine!

        - 3/8'' - 2'' : Vice clamping method

        - 2'' - 20'' : Chain clamping method

        - Enable you to  cut up to 24'' (please contact head office)

    • Device for prevention of saw blades being jammed is installed (exceptionally useful in large diameter pipes)
    • Minimizing the eccentricity while cutting and beveling
    • Free adjustment of blade while cutting and beveling
  • S-CM4_M
    Portable Hand Beveler - Pipe and plate film removal and beveling processing - Bevel capacity : 0 - 90 deg, 0 - 14C...

  • Portable Hand Beveler

    - Pipe and plate film removal and beveling process

    - Pipe minimum O.D : 25.4mm

    - Pipe maximum O.D : No limit

    - Plate : No limit

    - Bevel capacity : 0 - 90 deg, 0 - 14C

  • S-CM4_OD
    * Portable Film Removing Machine - Capacity : Maximum width is 48mm, Minimum width is 15mm - Pipe/Plate : Film removal and plate processing - Pipe Minimum O.D : 25.4mm - Pipe Maximum O.D : No limit - Plate : No limit ...

  • Portable Film Removing Machine

    • Processing Capacity : Maximum width is 48mm, Minimum width is 15mm
      - Pipe/Plate : Film removal and plate processing
      - Pipe Minimum O.D : 25.4mm
      - Pipe Maximum O.D : No limit
      - Plate : No limit
  • S-300HV/S-600HV
    Necessary for pipe processing factory! - Possible to cut and bevel the pipes on both sides at the same time(CNC Machine) - Capacity : Pipe O.D 60mm - 620mm (2 - 24inch) - Pipe wall thickness maximum 80mm ...

  • Necessary for pipe processing factory!

    - Possible to cut and bevel the pipes on both sides at the same time (CNC M/C)

    - Capacity : Pipe O.D 60mm - 620mm (2 - 24inch)

    - Pipe wall thickness maximum 80mm

    - The world's first dual cutting and beveling full automatic machine

    - The minimum working space throuch straight prodcution

    - Automatic tool change is possible with 6 tool holder equipped

    - The embodiment of various shaping processing : 8-axis servo motor

    - The integration of automatic feeder and carrying our device with centering function

    - The automatic oil pressure revision system : the minimum deformation through chuck pressure depending on the types of pipes.

BEWARE - Special Warning Notice about ExpoGuide and FAIRGuide

With the ongoing solicitations, SEMI would like to continue to alert you with questionable professional practices perpetrated against exhibitors by FairGuide.com (Austria) and Expo Guide (Mexico), Event Fair - The Exhibitors' Guide with their misleading directory services. There may be others that we are not aware of and are hence not named here. 

These companies provide legitimate exhibition guides aimed at exhibitors across the globe offering online listing services. They use a form which resembles and organizer's free catalogue listing service, inviting exhibitors to complete the form for an entry in an on-line directory. Unsuspecting exhibitors who sign and return the form are then contracted into a three-year, non-retractable agreement, which could cost the exhibitor a significant amount of money, with very limited foreseeable benefits. The details are often available on the form itself, but are often too small and insignificant to be noticed. It is always wise to really the small print before signing a contract, and if the information is impossible to read then the contract should not be signed. These publications have no connection with SEMI or any of our events, and it is important that all companies are made aware of this. 

Should you receive any communication from the Expo-Guide and Fairguide.com or related company, please IGNORE THEM COMPLETELY and DO NOT COMMUNICATE WITH THEM IN ANY WAY.

For Technical Support with this webpage, please contact support.