SET Corporation SA

Saint Jeoire, 
France
http://www.set-sas.fr
  • Booth: A410


Discover SET High Accuracy Flip-Chip Bonders

Founded in 1975, based in France, SET is a world leading supplier of High Accuracy Flip-Chip Bonders (chip-to-chip and chip-to-wafer) and versatile Nanoimprint Lithography (NIL) solutions.

With more than 350 equipment installed worldwide, SET is globally renowned for the unsurpassed accuracy and the flexibility of its flip-chip bonders.

Ranging from manual loading to fully automated version, the SET bonders adapt to all main bonding techniques: fluxless reflow, thermo-compression, adhesive joining compression, thermosonic…

SET offers a comprehensive product portfolio of flip-chip bonders for fast growing markets and serving clients through a global network of representatives (Woowon Technology in South Korea) and in-depth customer trainings.


 Press Releases

  • 3 minutes 20 seconds. That’s the record time announced in October 2019 by Google and the University of California, Santa Barbara (UCSB) to perform a calculation with a Sycamore quantum processor. A calculation that would have taken the most powerful computers 10,000 years. SET with its FC150 Flip-Chip Bonder was part of this recent achievement.

    Qubits Interconnected thanks to the FC150 Flip-Chip Bonder

    On October 23, 2019, Google announced a quantum breakthrough with the video Demonstrating Quantum Supremacy. The video was viewed more than 2 million times on YouTube in its first 24 hours. The FC150 appeared in the video as engineers were performing tasks.

    In an article jointly published by Google and UCSB in November 2017, the SET FC150 was cited as it was used to align and assemble a chip with a base substrate at room temperature with micrometric precision. This is part of a process that interconnects qubits - storage units specific to quantum computing.

    FC150:  a Flip-Chip Bonder for Advanced R&D

    With an accuracy of ± 0.5 μm, ± 1 μm after welding, the SET FC150 offers a wide variety of welding techniques, with configurations ranging from manual to all-automatic.

    With parallelism adjustment, aligning and soldering of components ranging in size from 0.2 to 100 mm, the FC150 meets almost all requirements for high-end welding applications, including reflow, thermocompression, bonding and fusion welding.

    The FC150 in detail


 Products

  • NEW PRODUCT - NEO HB
    The NEO HB is a flip-chip bonder designed for ±1 μm @ 3σ post-bond accuracy in stand-alone or full automatic mode (EFEM)....

  • The NEO HB is suitable for hybrid / direct bonding processes.

    It combines high precision, flexibility and short cycle time.                                           

    It is dedicated for production.

  • ACCµRA Plus
    The ACCµRA Plus is a flip-chip bonder designed for 0.5 µm post-bond accuracy in full automatic mode....

  • The ACCμRA Plus is suitable for reflow and thermocompression processes.

    It combines high precision, flexibility and short cycle time.              

    It is dedicated for production in the fields of optoelectronic and silicon photonics applications.

  • ACCµRA 100
    The ACCµRA 100 is a semi-automatic flip-chip bonder designed for 0.5 µm post-bond accuracy....

  • The ACCµRA 100 combines high precision, accessibility and cost-effectiveness.

    Its flexibility makes it ideal for developing a wide range of applications.

    It is the perfect equipment for universities and R&D institutes.

  • ACCµRA OPTO
    The ACCμRA OPTO is a flip-chip bonder designed for 0.5 μm post-bond accuracy....

  • The ACCμRA OPTO is dedicated for low force and reflow processes.                 

    Motorized axes guarantee a high repeatability of your process.

    The ACCμRA OPTO combines high precision, flexibility and accessibility.

    It is the perfect equipment for optoelectronics and silicon photonics applications.

  • ACCμRA M
    The ACCμRA M is a manual flip-chip bonder designed for 3 μm post-bond accuracy....

  • The ACCμRA M permits to align manually the components with a high level of precision.

    More than a pick-and-place system, it offers thermocompression and reflow capabilities.

    It is the perfect equipment for universities and R&D institutes.

  • FC150 and FC300
    The FC150 and the FC300 are very accurate flip-chip bonders dedicated for advanced R&D....

  • The FC150 is a high accuracy and versatile flip-chip bonder for chip-to-chip (up to 100 mm) and chip-to-wafer (up to 200 mm) applications on the same open platform. 

    It allows 1 µm post-bond accuracy.

    Perfect for advanced R&D, the FC150 is also adapted to pilot production thanks to its full automatization.

    ---

    The FC300 is a high accuracy and high force flip-chip bonder for chip-to-chip (up to 100 mm) and chip-to-wafer (up to 300 mm) applications.

    It allows 0.5 µm post-bond accuracy.

    The FC300 covers a large range of bonding forces, from 1 to 4000 N. That makes it perfectly suitable for reflow and thermocompression processes.

BEWARE - Special Warning Notice about ExpoGuide and FAIRGuide

With the ongoing solicitations, SEMI would like to continue to alert you with questionable professional practices perpetrated against exhibitors by FairGuide.com (Austria) and Expo Guide (Mexico), Event Fair - The Exhibitors' Guide with their misleading directory services. There may be others that we are not aware of and are hence not named here. 

These companies provide legitimate exhibition guides aimed at exhibitors across the globe offering online listing services. They use a form which resembles and organizer's free catalogue listing service, inviting exhibitors to complete the form for an entry in an on-line directory. Unsuspecting exhibitors who sign and return the form are then contracted into a three-year, non-retractable agreement, which could cost the exhibitor a significant amount of money, with very limited foreseeable benefits. The details are often available on the form itself, but are often too small and insignificant to be noticed. It is always wise to really the small print before signing a contract, and if the information is impossible to read then the contract should not be signed. These publications have no connection with SEMI or any of our events, and it is important that all companies are made aware of this. 

Should you receive any communication from the Expo-Guide and Fairguide.com or related company, please IGNORE THEM COMPLETELY and DO NOT COMMUNICATE WITH THEM IN ANY WAY.

For Technical Support with this webpage, please contact support.