DCSENG CO., LTD.

Cheongju-si, Chungcheongbuk-do, 
Korea (South)
http://www.s-cutter.co.kr
  • Booth: B301


DCSENG specializes in pipe cutting and beveling machines.

Founded by young founder who cherishes the dream of "technological development based on respect for humans and environment-centeredness," DCS (Dream, Challenge, and Success) ENG has made S-Cutter exclusively used for pipelines.

We believe that our convenient and efficient system that can freely meet any standards and materials with features necessary for pipeline installation work such as cutting, beveling, and prefab welding will fascinate you.

Our clean and comfortable working conditions for the safety of users and quick and precise workmanship will help raise competitiveness of companies. In addition, we will present an alternative to supply drinkable water in a clean and safe manner and take the lead in increasing profitability and protecting expensive equipment in industries.

We will continue our effort to become your partner that can help you step forward for your dream.

Thank you.

 Products

  • [S-Cutter/S-LT Series] Pipe Cutting & Beveling M/C
    * The most cost-effective orbital cutting machine! - Maximizing the user convenience - Equipped with a BLDC motor - Clamping O.D 6mm - 220mm at once - Capacity: 1/4'' - 8'' (Pipe O.D 6㎜ - 220㎜) - Pipe wall thickness Maximum 8.2mm...

    • The most cost-effective orbital cutting machine!

    • Maximizing the user convenience

        - Easy to replace cutting blades

        - Effective and convenient when processing short pipes

        - Possible to cut elbows

        - Mounted with a basic stopper for cutting and beveling

        - Maximizing the convenience of repetitive work

    • Optimally designed for the processing of thin pipes

        - Pipe deformation is minimized.

        - Minimum distances are secured between cutting & beveling blade and vise (fixed jaw).

    • Possible to finely tune processing depths

        - Improving the quality in cutting and beveling

        - A single touch adjustment device

    • Clamping of O.D 6mm - 220mm at once

        - No need for an auxiliary vise (vise jaw)

        - Shortening the working hours

    • Equipped with a BLDC motor

        - Providing stable torques of all the ranges and ensuring high reliability.

        - Adjusting speed according to work types with a 6-stage control.

        - With a built-in overload protection circuit.

    • Applying oilless bearing to the main shaft

        - The durability of the equipment is improved.

        - The clearance of the equipment is minimized.

  • [S-Cutter/S-150] Pipe Cutting & Beveling M/C
    * Cut, whether thick or thin, at a single stroke! - Maximizing the user convenience with automatic rotation - Newly developed orbital type - Capacity : 1/4'' - 6'' (Pipe O.D 5mm - 170mm) Pipe wall thickness maximum 12mm...

    • Cut, whether thick or thin, at a single stroke!

    • Maximizing user convenience with automatic rotation

        - Thick pipes are cut in right direction and beveled

        - Thin pipes are cut in reverse direction (spiral duct cutting available)

    • Clamping at once from O.D 6mm to 170mm
    • Newly developed orbital type

        - Axial motor mounted onto the body (to prevent the spatter while working)

        - Semi-permanent design for Anti-backlash

    • Free adjustment of blade while cutting and beveling is possible

  • [S-Cutter/S-500] Pipe Cutting & Beveling M/C
    * Necessary for stainless piping work! - The world's first pipe-rotation cutting method applied machine - Minimizing the eccentricity while cutting and beveling - Capacity : 3/8'' - 20'' (Pipe O.D 16mm - 510mm) - Pipe wall thickness maximum 10mm ...

    • Necessary for stainless piping work!

    • Maximizing user convenience with automatic rotation
    • Possible to cut and bevle from 16mm to 510mm with one machine!

          - 3/8'' - 2'' : Vice clamping method

          - 2'' - 20'' : Chain clamping method

          - Enable you to  cut up to 24'' (please contact head office)

    • Device for prevention of saw blades being jammed is installed (exceptionally useful in large diameter pipes)
    • Minimizing the eccentricity while cutting and beveling
    • Free adjustment of blade while cutting and beveling

  • [S-Cutter/S-TCA1.0] Squaring Tube Cutting Machine
    * One-touch automatic squaring tube cutting machine • High quality cutting with auto control by size • Capacity : Tube O.D 1/4 - 1inch...

    • One-touch Automatic Squaring Tube Cutting Machine

    • Improving productivity with auto control by size
    • Reducing the working time by using the
      one-touch function
    • No need to change tool holder to change size
    • Minimizing the damage of Tube O.D by using collet
    • Minimizing secondary processing through
      precision processing
    • Superior vertical cutting surface
    • Efficient work especially for bulk by applying
      measuring bar
    • Available in various sizes tube cutting (Max. 1inch)
    • Long-lived and high strength insert tip
    • Easy to move and install as lightweight machine
  • [S-Cutter/S-CM4 Series] Portable Hand Beveler
    1. S-CM4_M * Multi-function Hand Beveler 2. S-CM4_OD * Portable pipe/plate Coating Removal Machine...

    • 1. S-CM4_M
    * Multi-function Hand Beveler 

    • Pipe and Plate Coating Removal(outer diameter) and Beveling Processing
    • Bevel Capacity : 0˚ - 90˚, 0 -14C

    2. S-CM4_OD

    * Portable pipe/plate Coating Removal Machine

    • Processing Capacity : 48mm of maximum width, 15mm of maximum depth
    • Pipe / Plate : Coating removal (outside diameter) and flat processing

  • [S-Cutter/S-EM and TG Series] Portable Machines
    1. S-EM Series * High quality and ultra-light Squaring Facing Machine - Necessary for UHP pipeline construction 2. S-TG Series * Necessary for Welding Operator - Ultralight and rechargeable tungsten grinder...

    • 1. S-EM Series

    High Quality and Ultra-light Squaring Facing Machine

     - Necessary for UHP pipeline construction

     - Long-lived and high strength insert tip

     - Capacity: 1/4 - 1inch

    • Using a rechargeable motor(ultra-light)
    • Light and no vibration
    • Precise facing(minimum scale is 0.05mm)
    • Providing the vertical and precise processing surface(no burr)
    • High-capacity battery equipped(S-EM1.0)
    • Brush less motor equipped(S-EM1.0)
    • Tool designed for easy tip-out
    • Usage of effective Insert tip      

    - Enable you to use 4 surfaces(Titanum Coating)

    - Long-lived and high strength insert tip

    2. S-TG Series

    Necessary for Welding Operator

     - Ultralight and rechargeable tungsten grinder

     - Capacity: The minimum length of the electrode bar to be ground is 20mm

    • Using a rechargeable motor(Ultra-light)
    • Precise grinding, cutting and facing
    • Including the precision setting device
    • Usage of diamond wheel

     - Economic improvement by using double-sided and with cutting function

     - Select the diamond wheel roughness depending on the electrode bar specification

    • Improved convenience by marking cut scale
    • One-touch lock function is applied when changing diamond wheel
    • Angle fixed type(S-TGF) and angle adjustable type(S-TGR)
    • Multi-function collet application

    - No need to use jig depending on the specification of electrode bar

           - Electrode bar can be sharpened, even if it is stuck when welding

           - Non-standard electrode bar is available

           - The minimum length of electrode bar to be ground is 20mm

Categories

202 Equipment, General Use
  • Cutting; Drilling; Laser ablation; Beveling Equipment
    • Loading ...

    :
    :


    Legend
    Available Timeslot
    Scheduled Appointment
    Personal Appointments
    Appointment Request
    Blocked Timeslot
    Restricted Timeslot
    Cancelled
    Declined

    BEWARE - Special Warning Notice about ExpoGuide and FAIRGuide

    With the ongoing solicitations, SEMI would like to continue to alert you with questionable professional practices perpetrated against exhibitors by FairGuide.com (Austria) and Expo Guide (Mexico), Event Fair - The Exhibitors' Guide with their misleading directory services. There may be others that we are not aware of and are hence not named here. 

    These companies provide legitimate exhibition guides aimed at exhibitors across the globe offering online listing services. They use a form which resembles and organizer's free catalogue listing service, inviting exhibitors to complete the form for an entry in an on-line directory. Unsuspecting exhibitors who sign and return the form are then contracted into a three-year, non-retractable agreement, which could cost the exhibitor a significant amount of money, with very limited foreseeable benefits. The details are often available on the form itself, but are often too small and insignificant to be noticed. It is always wise to really the small print before signing a contract, and if the information is impossible to read then the contract should not be signed. These publications have no connection with SEMI or any of our events, and it is important that all companies are made aware of this. 

    Should you receive any communication from the Expo-Guide and Fairguide.com or related company, please IGNORE THEM COMPLETELY and DO NOT COMMUNICATE WITH THEM IN ANY WAY.

    For Technical Support with this webpage, please contact support.