1. S-LT Series
* The most cost-effective orbital cutting machine!
• Maximizing the user convenience
• Equipped with a BLDC motor
• Clamping O.D 6mm - 220mm at once
• Capacity
- 1/4'' - 8'' (Pipe O.D 6㎜ - 220㎜)
- Pipe wall thickness Maximum 8.2mm
• Maximizing the user convenience
- Easy to replace cutting blades
- Effective and convenient when processing short pipes
- Possible to cut elbows
- Mounted with a basic stopper for cutting and beveling
- Maximizing the convenience of repetitive work
• Optimally designed for the processing of thin pipes
- Pipe deformation is minimized.
- Minimum distances are secured between cutting & beveling blade and vise (fixed jaw).
• Possible to finely tune processing depths
- Improving the quality of cutting and beveling
- A single-touch adjustment device
• Clamping of O.D 6mm - 220mm at once
- No need for an auxiliary vise (vise jaw)
- Shortening the working hours
• Equipped with a BLDC motor
- Providing stable torques of all ranges and ensuring high reliability.
- Adjusting speed according to work types with a 6-stage control.
- With a built-in overload protection circuit.
• Applying oilless bearing to the main shaft
- The durability of the equipment is improved.
- The clearance of the equipment is minimized.
* 가성비 최고의 오비탈 절단 장비
• 사용자의 편의성 극대화
- 커팅날 교체가 편리
- 짧은 관재 가공에 유리
- 엘보 커팅 가능
- 절단 및 면취용 기본 스토퍼 장착
- 반복 작업의 편의성 극대화
• 얇은 관재 가공에 최적화 설계
- 관재 변형 최소화
- 커팅, 면취나라과 바이스(고정축) 최단거리 확보
• 가공 깊이를 미세하게 조절
- 절단 및 면취 품질 향상
- 원터치식 조절장치
• O.D 1/4 ~ 8 inch 한번에 클램핑
- Tube Collet 사용(1/4 inch, 3/8 inch, 1/2 inch)
- 보조바이스(바이스조) 필요없음
- 작업시간 단축
• BLDC 모터 장착
- 전영역 안정된 토크 및 고신뢰성
- 작업 종류별 6단 속도 조절
- 과부하 보호 회로 내장
• 주축 오일레스베어링 적용
- 장비 내구성 향상
- 장비 유격 최소화
2. S-150
* Cut, whether thick or thin, at a single stroke!
• Maximizing user convenience with automatic rotation
• Newly developed orbital type
• Capacity
- 1/4'' - 6'' (Pipe O.D 5mm - 170mm)
- Pipe wall thickness maximum 12mm
• Maximizing user convenience with automatic rotation
• Thick pipes are cut in the right direction and beveled
• Thin pipes are cut in the reverse direction (spiral duct cutting available)
• Clamping at once from O.D 6mm to 170mm
• Newly developed orbital type
• Axial motor mounted onto the body (to prevent the spatter while working)
• Semi-permanent design for Anti-backlash
• Free adjustment of the blade while cutting and beveling is possible
* 얇든 두껍든 단칼에 자른다!
• 세계 최대의 편의성과 작업속도
• 자동회전방식으로 사용자의 편의성 극대화
- 두꺼운 관재는 정방향으로 커팅하고 면취
- 얇은 관재는 역방향으로 커팅 (스파이럴덕트 커팅 가능)
• O.D 6mm ~ 170mm까지 한번에 클램핑
• 오비탈방식의 새로운 진화
- 주축모터를 몸체에 고정 (작업시 튐현상 억제)
- 반영구적인 백레쉬 제로화 설계
• 절단과 면취시 날전입량을 자유롭게 조절
3. S-500
* Necessary for stainless piping work!
• The world's first pipe-rotation cutting method applied to machine
• Minimizing the eccentricity while cutting and beveling
• Capacity
- 3/8'' - 20'' (Pipe O.D 16mm - 510mm)
- Pipe wall thickness maximum 10mm
• Maximizing user convenience with automatic rotation
• Possible to cut and bevel from 16mm to 510mm with one machine!
- 3/8'' - 2'' : Vice clamping method
- 2'' - 20'' : Chain clamping method
- Enable you to cut up to 24'' (please contact head office)
• Device for the prevention of saw blades being jammed is installed (exceptionally useful in large diameter pipes)
• Minimizing the eccentricity while cutting and beveling
• Free adjustment of the blade while cutting and beveling
* 스테인레스 배관 공사 필수 장비!
• 세계 최초! 파이프 회전절단 방식 채택
• 자동회전방식으로 사용자의 편의성 극대화
• 장비 1대로 16mm ~ 510mm까지 자르고 베베링
- 3/8 ~ 2 inch : 바이스클램핑 방식
- 2 ~ 20 inch : 체인 클램핑 방식
- 최대 24 inch까지 사용가능 (본사 문의요망)
• 톱날끼임방지장치 장착 (대구경에서의 탁월한 성능 발휘)
• 대구경 면취시 편심을 최소화
• 절단과 면취시 날전입량을 자유롭게 조절
4. S-TCA1.0
* One-touch Automatic Squaring Tube Cutting Machine
• Improving productivity with auto control by size
• Reducing the working time by using the one-touch function
• No need to change tool holder to change size
• Minimizing the damage of Tube O.D by using collet
• Minimizing secondary processing through precision processing
• Superior vertical cutting surface
• Efficient work especially for bulk by applying measuring bar
• Available in various sizes tube cutting(Max 1inch)
• Long-lived and high-strength insert tip
• Easy to move and install as lightweight machine
* 원터치 자동 튜브 커팅기
• 규격별 자동 제어 방식으로 생산성 향상
• 원터치 방식으로 작업 시간 단축
• 규격 변경시 툴홀더 교체 필요 없음
• 콜렛 적용으로 튜브 외경 손상 최소화
• 정밀 가공을 통한 2차 가공 최소화
• 최상의 수직한 절단면
• 길이 셋팅바 적용으로 대량 작업시 용이
• 다양한 사이즈 가공 능력(최대 1인치)
• 수명이 긴 고강도 인써트팁 사용
• 포터블한 무게로 이동 설치 용이