TAVT

The LNA-1015PDL is an ultra-precise Linearity actuator that enables the implementation of a fixed degree system due to the optimal combination design of the driver and valve, developed exclusively for each other, so that no distortion or hunting of control characteristics occurs. In this product, the vulnerability of the ball valve, the neck leak generation problem The valve shaft part was sealed and disclosed in 3 parts, thereby enhancing durability and greatly reducing the possibility of leaking. In addition, by blocking the fluid to the leak from shattering to the outside and outputting an alarm by the LEAK DETECT function that is built in at the same time, a rapid response before the occurrence of lssue is possible. The actuator has the characteristics of feedback standard mounting/6 control signals selectable, resolution 1200:1, compact design domestic minimum, connector detachable, and the valve is made of a strong corrosion resistance scs14A material, and can be applied to a variety of Orifice.

The LNV-10P is an ultra-precise Linearity actuator that allows for the implementation of a fixed degree system by eliminating the ONE BODY design of the valve and the driver, which significantly reduces the possibility of fatal LEAK occurrence due to the absence of mechanical seams, and the complete elimination of obstacles in precision control such as deviations and eccentricities due to valve assembly, so that no characteristic conversion or distortion of the control characteristics occurs. In addition, the simplified structure, which minimizes contract-less sensor application and direct drive, has high durability with little to no mechanical damage even in more than about 500,000 drive cycles.

* Proportional Control Motor - Flow Control
* LCD display mounted on top: meter can be checked
* Feedback built-in / 6 control signals selectable
* Resolution 400:1 (AC220V) / 600:1, 1600:1, 3000:1 (DC24V)
* Indicator attachment - facilitates checking valve operation (Open, Close)
* Compact design The smallest in Korea
* Built-in Limit switch : No power consumption other than operation
* NPM - Motorized in Japan
* Corrosion resistant SCS14A material
* Inner diameter: Reduced bore type (inner diameter smaller than piping size) See drawing
* Additional options such as gold oil treatment, electropolishing, etc. are available
* V-ball Applicability - Improved Precision                                                                         

* Chiller equipment, constant temperature and humidity equipment, automation equipment, testing equipment, automotive inspection equipment                             

* Fluid: Water, Air, Oil, Gas
* Working pressure: Max. 10kg/㎠ (basic)
* Fluid temperature: 0-80 degrees Celsius (basic) / 0-180 degrees Celsius (for separate inquiries)
* An operation power supply: AC220V (60Hz, 50Hz combined) / DC24V       

*. Proportional Motor - Cotrol fulid flow
*. LCD display on above part : Indicate guage
*. Feedback basic / 6 different control signal can be chose
*. Resolving power 400:1(AC220V) 600:1, 1600:1, 3000:1(DC24V)
*. Indicate attached on motor : Easy to check valve operation
*. Compact design - Domestic Smallest
*. Limit switch included : No power use except operation
*. NPM - Japan Motor

*. De-lonized water DI, Chemicals(Sulfuric Acid, Hydrochloric acid, Hydrofluoric acid), Sea water - exclusive use
*. By fulid, Valve material (PVC, HTPVC, PP, PVDF)and O-ring material(EPDM, VITON) can be sellected
*. Full Bore Type(Same internal size as pipe size) check the drawing
*. Various End connection - Union, PT, Flange type (request)

A pinch valve is a pneumatically operated shut-off device for application in the automation industry. The robust and simple design has fewer components, which ensures high operating reliability and long service life. The pinch valve has a simple structure and is easy to maintain. The compact design of the pinch valve can be used in many cases, even in the most difficult spaces to access. The highly elastic sleeve deforms under air-controlled pressure and forms a leap seal in the middle to stop the flow of the medium (fluid) as long as the control pressure is maintained. When the air control pressure is reduced, the sleeve of the valve opens with its own resilience. Pinch valves are the ideal solution for many applications. You can control any medium (fluid). It is hygienic, there is no empty space, and there is no fear of dirt getting pinched. There are also no obstacles to fluid flow. It is especially suitable for mixed media (fluids) of hard-to-flow materials such as solids, powders, silks, wastes, etc.