Interflux Singapore Pte Ltd

Singapore,  Singapore 
Singapore
http://www.interflux.com
  • Booth: 501

Introduction of Lead Free LOW MELTING POINT ALLOYS

LMPA™ is short for Low Melting Point Alloys™. These alloys allow you to use soldering temperatures that are considerably lower than for the traditional lead-free Sn(Ag)Cu (SAC) alloys.
 

LMPA-Q

LMPA-Q™ is an enhanced LMPA™ with superior mechanical properties. Developed by Interflux® Electronics, It's without exception the best alloy developed by the company so far. The benefits are wide-ranging for electronics manufacturers, as discussed below.

For all soldering processes

LMPA-Q™ can be used for all soldering processes

LMPA-Q will allow you to:

- Solder at lower temperatures between 190ºC and 250ºC
- Solder 5 times faster with zero defects
- Reduce voiding below 10%
- Reduce production costs
- Increas production line capacity
- Reduce your carbon footprint
- Avoid heat-related board and component failures
- No more need for nitrogen
- Eliminate dross formation (oxides)
- Excellent wetting


 Products

  • Low Melting Point Alloy LMPA
    LMPA is short for Low Melting Point Alloys™. These alloys allow you to use soldering temperatures that are considerably lower than for the traditional lead-free Sn(Ag)Cu (SAC) alloys....

  • LMPA-Q

    LMPA-Q™ is an enhanced LMPA™ with superior mechanical properties. Developed by Interflux® Electronics, It's without exception the best alloy developed by the company so far. The benefits are wide-ranging for electronics manufacturers, as discussed below.

    For all soldering processes

    LMPA-Q™ can be used for all soldering processes:
     

    Wave Soldering Icon      

    Wave soldering
    LMPA-Q: 200°C - 230°C
    Sn(Ag)Cu: 260°C - 280°C
     

    Selective Soldering Icon

    Selective soldering
    LMPA-Q: 200°C - 250°C
    Sn(Ag)Cu: 270°C - 320°C
     

    Reflow Soldering Icon

    Reflow soldering
    LMPA-Q: 190°C - 220°C
    Sn(Ag)Cu: 235°C - 250°C
     


     

    LMPA-Q will allow you to:

    - Solder at lower temperatures between 190ºC and 250ºC
    - Solder 5 times faster with zero defects
    - Reduce voiding below 10%
    - Reduce production costs
    - Increas production line capacity
    - Reduce your carbon footprint
    - Avoid heat-related board and component failures
    - No more need for nitrogen
    - Eliminate dross formation (oxides)
    - Excellent wetting

  • Jet Fluxing for Wave and Selective Soldering
    The ICSF-Select offers a Total Flux Process control needed for today’s more demanding and complicated soldering requirements, especially lead-free processes....

  • ICSF Select

    NEW

    NEW

    • For wave soldering

    • For selective soldering

    • For alcohol based fluxes

    • For water based fluxes

    • For rosin based fluxes

    The Revolutionary Selective Jet Fluxer is designed to control the amount of flux for each solder joint without losing the ability to maintain the required cycle time demanded by wave soldering processes. The Jet technology used replaces completely the need of spray technology. As a result, the ICSF-Select offers a Total Flux Process control needed for today’s more demanding and complicated soldering requirements, especially lead-free processes.
     
    √ Environmental friendly
    √ Up to 95% less flux usage
    √ Less maintenance chemicals
    √ Longer life of PCB carriers/pallets
    √ Tremendous reduction in flux fumes going into the exhaust/environment
    √ Solderability Performance
     
    The ability to program points, lines, multi-lines, areas allows the engineer to decide how much flux/pressure is required for certain solder joints up to complete areas. This capability opens up the process window without risking excess of flux residues. Thanks to the XY-movement speed up to 1,500 mm/s, the cycle time will be up to the standard required for wave soldering mass production.

    ICSF Select front viewICSF Select side view


 Additional Info

New Exhibitor:
Yes
New Products:
Yes
Displaying Equipment:
No
Product Demonstrations:
No
Please indicate which industries/technologies your company serves
LED/solid state lighting, Power Semiconductors, Semiconductor
For Technical Support with this webpage, please contact support.