Nordson Advanced Technology (International) Pte. Ltd.

  • Booth: A712

We are looking forward to meet you in Semicon Malaysia 2019

Nordson EFD designs and manufactures precision dispensing devices for applying controlled amounts of the adhesives, sealants, lubricants and other assembly fluids used in almost every manufacturing process. Nordson EFD products are available through a worldwide network operating in over 30 countries. Nordson EFD is a division of Nordson Corporation (Nasdaq: NDSN), one of the world's leading producers of precision dispensing equipment that applies adhesives, sealants, coatings and other materials to a broad range of consumer and industrial products during manufacturing operations. The company also manufactures equipment used in the testing and inspection of electronic components as well as technology-based systems for curing and surface treatment processes. Headquartered in Westlake, Ohio, Nordson has direct operations and sales support offices in more than 30 countries.


  • UltimusPlus-NX I-II Dispensers
    Nordson EFD’s UltimusPlus-NX fluid dispenser allows direct communication with a Programmable Logic Controller (PLC) or other manufacturing plant controllers using NX protocol over Transmission Control Protocol / Internet Protocol (TCP/IP) via Ethernet....

  • Control UltimusPlus™-NX fluid dispensers using Ethernet compatibility with NX protocol via TCP/IP for Smart Factory integration.

    Nordson EFD’s UltimusPlus-NX fluid dispenser allows direct communication with a Programmable Logic Controller (PLC) or other manufacturing plant controllers using NX protocol over Transmission Control Protocol / Internet Protocol (TCP/IP) via Ethernet.

    This technology enhancement allows operators to control all dispensing parameters directly from a PLC or computer, giving the operator complete remote control of our UltimusPlus-NX fluid dispensers. Save time by updating multiple dispensers from a centralized location.

    In addition, UltimusPlus-NX’s intuitive web interface matches the local interface for convenience to program the dispenser from nearly any device remotely, including a tablet, PC, or mobile device.

    Experience improved process documentation with the ability to download dispense log data from the unit to a USB drive or remotely directly to an FTP site.

    UltimusPlus-NX I
    This unit features a 0.7-7.0 bar (10-100 psi) pressure regulator and is ideal for dispensing a wide range of fluids.

    UltimusPlus-NX II
    This unit features a 0.02-1.0 bar (0.3-15 psi) pressure regulator and provides greater control when dispensing low-viscosity or thin fluids.


    • Ethernet control with NX protocol via TCP/IP for communication between PLC and UltimusPlus-NX
    • Nordson NX Client Application included, Windows-based graphical user interface (GUI)


    • Improve operational efficiency by programming UltimusPlus-NX fluid dispensers directly from a central PLC
    • Improve process documentation with the ability to download dispense log data remotely directly to FTP site
    • Nordson NX Client Application software offers in-place troubleshooting capabilities, providing convenience to program the dispenser from nearly any device remotely

    UltimusPlus-NX fluid dispensers have the same feature set as the standard UltimusPlus fluid dispensers, but with this added functionality of being network capable.

  • 797PCP-2K Progressive Cavity Pumps
    Continuous volumetric meter mix dispensing for two-component (2K) fluids provides industry-leading process control for manufacturers.

  • Nordson EFD’s 797PCP-2K Series pumps precisely meter accurate ratios of part A and part B materials through static mixers for highly repeatable dispensing with fluid deposit accuracy at +/- 1%.

    With a modular design that consists of two 797PCP-2K pumps and a manifold that accommodates a wide range of EFD’s disposable Series 190 spiral and Series 295 square Turbo mixers, Nordson EFD offers a total system solution backed by 50+ years of two-component fluid dispensing expertise.

    This allows us to test your application in our global application labs and recommend the right two-component dispensing system, which can save time and costs when it comes to implementation.

    797PCP-2K progressive cavity pumps come in three sizes – 0.01 mL, 0.05 mL, and 0.15 mL. This allows for multiple mix ratios for a wide range of applications.

    Perfectly sealed metering chambers allow for continuous volumetric dispensing independent of fluid viscosity or changes in viscosity over time, making the pump system ideal for applying two-part epoxies. The continuous seal prevents shear, pulsation, and squeezing of fluid, which simplifies abrasive material dispensing.

    Features and Benefits

    • Highly precise, continuous volumetric dispensing with 2K fluid volume accuracy at +/- 1% for exceptional process control
    • Modular design for multiple mix ratios and use in many different types of applications
    • Compatibility with a wide range of EFD static mixers simplifies implementation
    • Programmable suck-back provides more accurate dispensing without dripping or drooling

    Compatible Fluids

    • Acrylics
    • Epoxies
    • RTVs and sealants
    • Silicones
    • Urethanes

    The complete system includes two 797PCP-2K volumetric dispensing pumps, a manifold, a touchscreen ValveMate 7197PCP-2K or two 7197PCP-DIN controllers, two fluid reservoirs, and a bayonet static mixer. Integrate with an EFD automated dispensing system for even faster throughput.

    EFD bayonet static mixers deliver complete and thorough mixing for superior mix quality and bond strength. They come in multiple lengths, diameters, and with various outlet styles. Some feature luer lock adapters for attaching dispensing tips.

    A standard 797PCP pump is also available for precise volumetric dispensing of one-component fluids in automated assembly processes. 

    7197PCP-DIN-NX controller is available for Smart Factory integration. It allows communication with a PLC or other manufacturing plant controllers using TCP/IP via Ethernet.

  • PICO XP Jetting System
    The PICO XP jetting system takes the guesswork out of how to achieve the same extremely precise (XP), repeatable non-contact micro-dispensing from valve-to-valve, after maintenance, and as temperatures rise or fall....

  • Micron (µm) level stroke adjustment and unique self-regulating calibration allow this revolutionary jetting system to meet unprecedented levels of fluid dispensing repeatability over long periods of time, regardless of environmental factors.

    Manufacturers sometimes see variation in dispensing performance when there is even a slight change in the tolerance of a jet valve’s internal geometry. Therefore, one jet valve may produce a slightly different dispensing outcome than another with the same dispense settings. This is also why dispensing outcomes can sometimes change after a fluid body is removed, cleaned for maintenance, and then returned to the valve.

    The PICO XP jetting system’s proprietary self-regulating calibration technology controls for variations in fluid body tolerance to maintain the same micro-dispensing repeatability from valve-to-valve and after maintenance.

    Its one-of-a-kind sustained stroke target seeking allows it to self-adjust to maintain its micron (µm) level stroke setting for long periods regardless of environmental conditions, such as ambient temperature changes that can alter dispense results over time.

    The system includes a PICO Pµlse XP jet valve and PICO Toµch XP controller with an intuitive touchscreen interface for simplified set up. It can apply micro-deposits as small as 0.5 nL at speeds up to 1000Hz (deposits per second) continuously.

    The valve’s quick-release clasp allows for tool-free removal of the fluid body for simplified cleaning of the fluid path, which saves manufacturers time during maintenance.

    And the valve can be outfitted with one of several fluid bodies available with different properties and orifice sizes to meet manufacturers’ unique and versatile application requirements.

    Features and Benefits

    • XP self-regulating calibration for improved valve-to-valve dispensing repeatability and repeatability after maintenance
    • Sustained stroke target seeking for maintaining dispensing repeatability regardless of environmental conditions
    • Micron (µm) level stroke adjustment for fine-tuning jetting performance for a wide range of applications

  • Liquidyn P-Dot Series Jetting Valves
    Designed for thicker medium-viscosity to highly viscous materials, the pneumatically actuated Liquidyn® P-Dot jet valve provides very precise, repeatable jetting in the form of dots, beads, and lines....

  • With extremely short triggering intervals of less than 1 ms, it is possible to accurately apply small amounts of viscous fluids. Deposit volumes range from 3 nL to 200 nL and can be dispensed at frequencies up to 150Hz.

    The Liquidyn P-Dot features interchangeable dispensing nozzles, tappets, and fluid inlet fittings, which make it easy to adapt for exacting application requirements. Wetted parts separate from the actuator simplify service and maintenance.

    The valve’s rigorously-tested design makes it able to withstand highly-industrial environments. It also has a low cost of ownership.


    • Highly precise, consistent jetting of medium- to high-viscosity materials
    • Separate wetted parts and interchangeable components allow for quick, easy maintenance and adaptability for exacting application requirements
    • Deposit volumes ranging from 3 nL to 200 nL at dispensing frequencies up to 150Hz

    Compatible Fluids

    • Adhesives
    • Lacquers
    • Oils/greases
    • Silicones
    • Fluxes

    The complete system includes the Liquidyn P-Dot, Liquidyn V200 controller, and fluid reservoir. The valve can be operated using either a Liquidyn V200 valve controller or a customer-supplied PLC.

    Also available, the Liquidyn P-Jet jet valve delivers very accurate, repeatable micro-deposits of low- to medium-viscosity fluids at up to 280Hz. For solder paste jetting, the Liquidyn P-Jet SolderPlus jetting system is designed specifically to jet specialized Nordson EFD solder paste, providing a complete system that streamlines implementation.

  • xQR41 MicroDot Valves
    The xQR41 Series MicroDot™ needle valve features QR (Quick Release) technology, a 60% smaller form factor, and modular design for new levels of customization in precision fluid dispensing....

  • Ideal for automated assembly processes, the xQR41 MicroDot valve’s smaller dimensions allow it to dispense in tighter spaces at more complex angles. The added flexibility to mount more valves per fixture plate delivers greater output per batch.

    In addition, its patented QR (Quick Release) clasp allows easy removal of the fluid body to replace wetted parts in seconds, vs. traditional change outs which take minutes. The clasp design eliminates the need to remove the mounting fixture or use any tools during valve maintenance.

    The xQR41 needle valve’s exchangeable modular design makes it easy to adapt to a variety of specific dispense applications. Its configurability with PEEK wetted parts, BackPack™ Valve Actuator, mounting block, or 90° low-profile air inlet actuator, among other interchangeable parts, makes it uniquely accessible and cost effective.


    • 60% smaller form factor than conventional needle dispense valves
    • Consistent microdots as small as 150 µm (0.15 mm) (0.006”) diameter
    • Exchangeable, modular design
    • Zero dead fluid volume

    When the application of larger deposits is required, the xQR41V Series needle valve provides all the benefits of the xQR41 and is compatible with the full range of Nordson EFD dispensing tips. 

  • 781Mini Spray Valves
    The 781Mini™ spray valve’s innovative design directs nozzle air pressure more consistently for exceptionally more uniform, narrower spray patterns than previously possible....

  • Using Low Volume Low Pressure (LVLP) technology, the 781Mini provides precision spray control with consistent spray patterns as narrow as 1 mm (0.04”) wide.

    With a 60% smaller form factor than conventional spray valves it’s possible to mount more valves per fixture plate for high volume applications. It’s also possible to install in tighter manufacturing environments or complex spaces.

    The 781Mini’s enhanced spray nozzle design improves spray pattern uniformity, providing better accuracy and edge definition. Its unique, patented (QR) quick release clasp reduces downtime to seconds when servicing the valve.


    • More uniform spray patterns
    • Consistent area coverage as narrow as 1 mm (0.04”) wide
    • 60% smaller form factor than conventional spray valves
    • High transfer efficiency with no overspray
    • Modular design for lower cost of ownership

    Compatible Fluids

    • Activators
    • Coatings
    • Light greases
    • Oils
    • Inks
    • Liquid fluxes
    • Solvents
    • Silicone oils

    See manual for replacement parts.

    The complete system includes a 781Mini spray valve, ValveMate™ 8040 or 7140 controller, and fluid reservoir. Achieve greater productivity with a benchtop automated dispensing system.

For Technical Support with this webpage, please contact support.