Cryogenic Specialty Manufacturing Sdn. Bhd.

StatiRigid-P

Constructed in modular sections with smooth inner bore pipe size, StatiRigid-P comes with periodic internal bellows to minimize pressure drop and improve flow characteristics. It has the lowest heat leak and lowest cooldown loss in its class.

Suitable for use in a wide variety of industrial applications such as Electronic Assembly & Test, Food & Beverage, Petrochemical, Industrial Gas Plant, LNG etc. 

Engineered as modular sections, these stainless steel coaxial vacuum insulated piping spools are joined together with close tolerance bayonet connections, forming a complete cryogenic transfer system.

Each section is evacuated, sealed and tested for vacuum integrity to ensure minimal heat gain. StatiRigid-P comes with internal bellows at required intervals to serve as thermal expansion compensators according to EJMA calculation. The pipe comes with smooth inner bore to minimize pressure drop and improve flow characteristics.

Installation for StatiRigid-P can be done easily both indoor and outdoor, by incorporating flexible sections strategically to offset misalignments.

Features and Benefits

- StatiRigid-P pipe is easy to install due to its modular design

- Greater thermal efficiency compared to foam insulated pipes by more than 10 times

- Excellent flow characteristics make StatiRigid-P  an ideal as main supply pipe and as header pipe

- Super insulation and  proprietary chemical getters ensures long lasting vacuum integrity

- Fabricated by mechanized welding system process ensuring consistent weld quality

StatiRigid-T

comes with high-purity tubes  compliance to semiconductor or Biopharmaceutical specification with minimum contamination to customer process.

The spool fabrication is done in a clean and controlled environment with orbital welding procedure.

Both inner & outer pipe surface are polished, degreased, ultrasonic cleaned, and final-rinsed with high purity RO water, before it is used in process application.

Engineered as modular sections, these stainless steel coaxial vacuum insulated piping spools are joined together with close tolerance bayonet connections, forming a complete cryogenic transfer system.

Each section is evacuated, sealed and tested for vacuum integrity to ensure minimal heat gain. Rigid-T comes with internal bellows at required intervals to serve as thermal expansion compensators according to EJMA calculation.

Installation for Rigid-T can be done easily both indoor and outdoor, by incorporating flexible sections strategically to offset misalignments.

CSM offers a complete line of components including in-line venting devices, phase separators and gas traps to maximize the cryogenic system performance.

Features and Benefits

- Fabricated by orbital welding to ensure process integrity

- Polished outer jacket provides clean pipe surface for cleanroom requirement

- Rigid-T pipes are durable, easy to install and practically maintenance free

- Excellent flow characteristics make Rigid-T an ideal for pipe mains

- Super insulation and  proprietary chemical getters ensures long lasting vacuum integrity

Semi-Flex Dynamic Transfer Hose

Semi-Flex, a semi-rigid bendable pipe with optimal flexibility is suitable for long distance piping system application, an alternative to traditional rigid piping. It’s lightweight stainless steel construction reduces  cool-down losses to an absolute minimum.

Semi-Flex hoses are protected by a high quality and wear resistant stainless steel braid outer covering. Typical hoses are manufactured with pipe thread ends or bayonet connection.

These hoses are used in a wide variety of applications as main transfer hose for LN2 such as food freezing, semiconductor test handlers, MBE and LN2 dosing applications.

Features and Benefits

1. Tees, elbows, bayonets and valves can be  incorporated with Semi-Flex transfer hose for a customized LN2 piping system
2. Both flexible and rigid sections can be  combined as one spool
3. Select hoses are stocked for immediate delivery
4. Special MLI system ensure fast pump down speed to < 10 -4 Torr 
5. Each hose is helium  leak checked (1 x10 -9 std cc/sec) and liquid  nitrogen cold shocked before shipping
6. Vacuum insulation eliminates frost, ice and related safety hazards

Semi-Flex Static Transfer Hose

Semi-Flex, a semi-rigid bendable pipe with optimal flexibility is suitable for long distance piping system application, an alternative to traditional rigid piping. It’s lightweight stainless steel construction reduces  cool-down losses to an absolute minimum.

Semi-Flex hoses are protected by a high quality and wear resistant stainless steel braided outer covering. Typical hoses are manufactured with pipe thread ends or bayonet connection.

These hoses are used in a wide variety of applications as main transfer hose for LN2 such as food freezing, semiconductor test handlers, MBE and LN2 dosing applications.

Features and Benefits

1. Semi-Flex can  be  coiled  for shipment by air freight, thus eliminate the need for expensive logistics
2. Tees, elbows, bayonets and valves can be  incorporated with Semi-Flex transfer hose for a customized LN2 piping system application
3. Select hoses are stocked for immediate delivery
4. Super insulation and  proprietary chemical getters ensures long lasting vacuum integrity
5. Each hose is evacuated (10 -6 torr), helium  leak checked (1 x10 -9 std cc/sec) and liquid  nitrogen cold shocked before shipping
6. Vacuum insulation eliminates frost, ice and related safety hazards

Phase Separator - Pressure Adjustable

Pressure adjustable Phase Separator is used forstepping down the pressure of liquid nitrogen in thepipe line. This is done by venting out excessive vaporwhile maintaining a constant liquid supply capacityfor downstream consumption. The result is a highquality, low pressure liquid nitrogen with precisetemperature control at the user’s point of use. CSM Phase Separator is a vacuum insulated reservoirholding tank for liquid nitrogen with a pressure &level control system. The controller will operate itsinlet proportional control valves to regulate theliquid level, and another vent proportional valve toregulate the user’s required set pressure.

Typical Applications

1. Test Handlers in semiconductor IC Assemblyand Test
2. Environmental Chambers
3. Bottling Lines and Packaging
4. Food Freezing

Features and Benefits

1. Consistent liquid nitrogen delivery, dramaticallyimproving process control and efficiency.
2. User friendly operator controls with level &pressure alarm• Vacuum jacketed vessel for frost-free operation.
3. User adjustable output pressure for all models.
4. HMI with digital display of liquid level andpressure readings
5. Modbus output available

Ultra-Flex Transfer Hose

Ultra-Flex transfer hose is a ultra-flexible, vacuuminsulated LN2 transfer hose with high flexibility. Ithas the lowest dynamic bend radius among allcryogenic hoses in the market. Due to its lightweight stainless steel construction,cool-down loss can be reduced to an absoluteminimum. Ultra-Flex hoses are protected by a tough and antikink stainless steel spiral wrap outer covering, its nonwire braid prevent potential operator injury due tosharp wire found in traditional braided sleeve. Typical hoses are manufactured with pipe threadends or female flare 1/2" JIC/CGA fittings or C5bayonet. These hoses are used in a wide variety ofapplications including tool connections with portabledewars supplying LN2 to test handlers, LN2 doser, orany moving reservoirs and custom OEM applications.

Features and Benefits

1. Tees, elbows, bayonets and valves can beincorporated with Ultra-Flex transfer hose for acustomized LN2 piping system application• Both flexible and rigid sections can be combinedas one spool
2. Select hoses are stocked for immediate delivery
3. Super insulation and proprietary chemical gettersensures long lasting vacuum integrity
4. Each hose is evacuated (10 -6 torr), helium leakchecked (1 x10 -9 std cc/sec) and liquid nitrogencold shocked before shipping
5. Vacuum insulation eliminates frost, ice and relatedsafety hazards

Degasser

Due to a constant heat leak and pressure dropbetween storage tank and consumer use points,some portion of liquid nitrogen in the pipeline willevaporates into gas or vapor. As liquid passesthrough degasser, the gas is removed ensuring highquality liquid delivery to use-points. This is done bymechanically separating boil off gas from the liquid.The degasser is maintenance free and do notrequire field adjustments. Its operation requires noelectrical power, sensors, pneumatics, electronicsPre-engineered degasser has capacity of deliveringliquid nitrogen flow consumptions up to 200 L/h.Higher capacities are available on request.

Typical Applications

1. Suitable for cool down of piping without ventingthe gas through the equipment
2. Use as Phase Separators in combination with aback-pressure valve when no electric power orpneumatics are available

Features and Benefits

1. Degasser is ready with bayonet or pipe threadedtermination
2. Uses a bayonet connection to facilitate futureexpansion of the piping system
3. Ensure consistent and efficient liquid supply frombulk storage to the end application
4. Maintains liquid in the piping system at all times