Tokimeku Pte Ltd

With the new CuttingMaster 2240 system variant with tensor technology, LPKF sets new standards in terms of price-performance ratio and establishes a new benchmark for the industry. Benefit yourself from increases of up to 25% on all quality levels!
The CuttingMaster 2240 expands LPKF's depaneling portfolio with a new system variant featuring the newly developed and disruptive Tensor Technology. The CuttingMaster 2240 is the first and so far only depaneling system with Tensor Technology. The variant is based on the proven 2000 platform, which is characterized in particular by its great reliability, high precision and small footprint.

Like all other LPKF depaneling systems, the new variant is available in both manually operated (P) and automated (Ci) versions. The automated systems can be easily integrated into production lines or fully automated stand-alone solutions and can be supplemented with either external or automation solutions from LPKF. The degree of automation is therefore scalable according to customer requirements (even at a later time).

With this system, we have launched the new flagship for our strategy to offer customers the best price-performance ratio on the market. With the use of the CuttingMaster 2240, performance increases, i.e. gains in effective cutting speed, of up to 25% can be achieved on all quality levels - varying depending on the specific application. 

The use of the Tensor increases the quality of the printed circuit boards, since previously required cooling times are no longer necesary. This is the case beacuse the Tensor - an ultra-fast beam guidance system - distributes the pulses specifically around the spot without widening any necessary cutting channels! In addition, the available power is optimally utilized, which leads to an significant increase in efficiency. The added value of the Tensor enhances with increasing material thickness and especially with technically clean cuts. With CleanCut, the cycle times can even be reduced by up to 70% due to the Tensor!

Especially customers who are still routing their panels for economic reasons should take notice. Because the laser is now more than a match in terms of cost-effectiveness and also brings a number of other technological advantages, such as inimitable technical cleanliness as well as maximum precision and stress-free processing.

The latest Soldering Station with 100W for high-powered soldering

15° angle tilt
Over 60 different tip sizes and shapes
Stackable and compact design for smaller footprint
100W with wide temperature range of 50°C to 450°C
Wireless IR Offset and Control Software

Changes in electronics and its environment creates new challenges for user and manufacturers alike. At Hakko, we have been working closely with end-users to solve problems and meet the needs of soldering all over the world. 

Now, the "standard" of soldering is evolving, and we at Hakko, are changing too. 

Take a look at the future of soldering with the brand new Hakko FX-971 and FX-972 - The Next Generation of Soldering Stations with Precision and Innovation.

The LPKF PowerWeld 3600 enables high design flexibility. All components are housed in the compact housing: laser, control unit and cooling system. The PowerWeld 3600 also has a rotary indexing table - for higher throughput. Integrated online process monitoring ensures optimal workpiece quality and productivity.

Configuration
Laser nlight E18
- Air-cooled, 200 µm, 235 Watt power
Optical standard configuration
- 200 µm, f40, MS-III-20, F-theta 330
- Working field (Laser): 178 mm x 130 mm
- Spot size: 2,3 mm
Single-clamp module – Large “L”
- Pneumatic bottom up: 850 N –1900 N
Servo-electrical rotary table
Human-Machine Interface
- HMI touchscreen in center
- Two hand start button
Industrial PC with WeldPro Light (ScannerControl)

Showcasing Tokimeku's automation and system integration abilities with our brand new 2D Camera Guided Autoloading Machine. 

Launching at SEMICON, the 2D Camera Guided Autoloading Machine is Tokimeku's third series of custom show projects refined since 2022.
In this iteration, our automated system is integrated with not one, but two existing stand-alone machines to enhance its mass-production capabilities. A conveyor belt autoloads a PCB Panel into our LPKF Laser Depaneling Machine for processing. With the aid of the 2D Camera, a robotic arm then carries the individual PCBs over to the HAKKO Auto-soldering station for soldering of components onto the board. 

Our system integration are custom-fit to automate your production line, improving efficiency and production yield.

Multifunctional Control Features
The industrial PC control can set a variety of operating modes with real-time display of temperature curve. Each curve can be set to more than 12 segments and it can automatically analyze the curve, as well as automatically save the temperature curve to generate a large number of log files to facilitate the recall of historical parameters for traceability.

Convenient Temperature Setting and Saving
Three temperature zones independently controlled by programming enables convenient and quick setting of temperature parameters and temperature saving records. The top zone uses ceramic heaters, and a built-in vacuum tube is used for chip adsorption. It also has electric control with 360 degree rotation alignment and pressure protection device, dual over-temperature protection and alarm function, software design with encryption and foolproof functions.

Bottom Heating System
The medium-wave ceramic infrared heating plate is imported from Germany, and the bottom temperature zone can be independently heated to adjust according to the distance from the PCB like a infrared BGA rework station. Fast temperature rise and high temperature control accuracy means more effective PCBA preheating and rework.

Smoke Purification System
The built-in three-level smoke purification system can filter and purify the toxic gas generated in the work, effectively protecting the environment.

HD Optical Alignment Module
Imported HD CCD (2m pixels) optical alignment system using the PC control system to automatically move the optical lens alignment along X/Y axis. Larger 15' HD industrial display (1080P 16: 9) and 18.5' SD display operation makes it easier to view processes. Equipped with automatic feeding device to feed and receive automatically.