Sanyu Electric Pte Ltd

Singapore, 
Singapore
  • Booth: I2205
  • - 1st Floor


Visit our booth for the latest Switching Technology

SANYU has extensive experience in developing various types of reed relays since 1972. Our facilities are ISO9001 ceritified.We had provided quality relays to world's leading ATE, Semiconductor & Measurement Manufacturers. SANYU has been included in presenting ideal relays for ATE and DUT since 1995. Products had been expanded to Relay Driver, Cable Assembly, Pogo-pin/block, FPC connector, Interposer and Manipulator.

 Press Releases

  • SANYU has extensive experience in developing various types of reed relays since 1972. Our facilities are ISO9001 ceritified.We had provided quality relays to world's leading ATE, Semiconductor & Measurement Manufacturers. SANYU has been included in presenting ideal relays for ATE and DUT since 1995. Products had been expanded to Relay Driver, Cable Assembly, Pogo-pin/block, FPC connector, Interposer and Manipulator.
  • The 113D series relay has been developed to meet the high density
    trend of small packages, with higher voltages, higher current capabilities
    and high insulation that are required for surface mount relays.

 Products

  • 113-1A10N2G/113D-1A20N2G
    The 113D series relay has been developed to meet the high density trend of small packages, with higher voltages, higher current capabilities and high insulation that are required for surface mount relays....


    • - 100Watts contact rating and 1000V switching capability
    - 2.8A Current Rating
    - 3000V Breakdown Voltage
    - 100x 10^6 Cycle life Expectancy
    - Insulation Resistance up to 10^12

  • 90D-1A21K32/90D-2A21K32/90D-3Ax1K32
    The 90D Series is a high insulation resistance relay with a flexible board connection features. The insulation resistance is rated 10^13 (switch contacts), which is ideal for current measurement in 10-12 amps range....

    • The 90D Series is a high insulation resistance relay with a flexible board connection feature.

    This isulation resistance is rated 10^13 switch contacts), which is ideal for current measurement in 10-12 amps range.

    With its flexible pin connection length , this series has been widely used in DC characteristic verification for proto device, and maintenance for DC parametric test systems.

  • FPC Test Connector
    In electronics devices, sucg as cell phones and digital cameras, flexible printed circuit boards are often used to make an electrical connection between boards and modules in place of cable....

    • General Specifications:-

    • Electric power rating Max. 30W
    • Max current rating 1.5A
    • Max voltage rating 50V (AC/DC)
    • Withstand voltage AC 250V/1min
    • Insulation resistance min 100mohms
    • Contact resistance max less than 100mohms (contact area)
    • Operating temperature 0-65
  • 20D-1Cx2N1-53
    With proven track of reliability, the 20D Series 1 Form C relay has been on the market for more than 28 years. Now Sanyu has added on this series to suit to the need of high operating temperature up to 155 ˚C...

    • – Operating Temperature -20˚C to +155˚C
    – Contact Rating 3W
    – Electrostatic Shield
    – Electric Magnetic Shield
    – Breakdown Voltage 1.5KV
    – RF Performance up to 1.5GHz
  • Manipulator
    It is manipulator for easy and reliable contact with impedance measurement of board, signal level measurement using coaxial prob...

    • -When you want to make coaxial probe stably contact in substrate measurement.
    -When you want to adjust the contact position and the stroke amount.
  • CP-120-M256
    Features: – Impedance 50 ohm – Broadband frequency: DC to 20 GHz...

    • Features:

    – Impedance 50 ohm

    – Broadband frequency: DC to 20 GHz

Categories

200 Equipment, Assembly
  • Hot Embossing System
  • Package Simulation; Characterization Equipment
  • Wire Bonding Equipment
    • 202 Equipment, General Use
  • Repair; Rework Equipment
    • 203 Equipment, Inspection & Measurement
  • Acoustic Spectroscopy; Electron Spectroscopy for Chemical Analysis (ESCA); Ultrasonic; Acoustical Mi
  • Spectrometers; Fourier Transform Infrared (FTIR); Attenuated Total Reflectance FTIR (ATR-FTIR); Auge
    • 205 Equipment, Nanotechnology
  • Equipment, Nanotechnology Tools
    • 208 Equipment, Test
  • Burn-In Accessory Systems
  • Burn-In Systems
  • Circuit Repair; Design Modification; Redundant Memory Repair; Mask Repair Systems
  • Discrete Component Test Systems
  • Environmental Stress Systems - Temperature; Humidity; Pressure; HAST
  • ESD; EMS and Latch-up Systems
  • Failure Analysis Systems
  • FPD Test; Measurement; Repair Equipment
  • Functional Test Systems
  • Linear Test Systems
  • Logic Test Systems
  • Memory Test Systems
  • Optical Test Systems
  • Package Test Systems
  • Parametric Test Systems
  • Printed Circuit Board; Wire Board (PCB or PWB) Test and Repair
  • Probe Card Maintenance and Analysis Systems
  • Probing Equipment incl. Analytical; Circuit; Manual; E-Beam; Optical; Wafer Probers
  • System on a Chip (SOC); Mixed Signal Test Systems
  • Test Contactor Cleaning; Conditioning Systems
  • Test Head Manipulators and Docking Stations
  • Wireless, non-contact Test Systems
    • 300 Materials, Assembly
  • Packages; Ceramic and Other High Temp Compounds
    • 400 Components, Parts & Accessories
  • Connectors; Plugs; Interconnects; Cable; Wire
  • Electronic Hardware; Fixtures and Supplies
  • Magnetic Components; Heads
  • Raw Material & Custom components; Plastic
    • 401 Sub-systems
  • Process Monitoring systems
    • 501 HVAC, Temperature, Humidity, Contamination Control
  • HVAC; Temperature; Humidity Systems and Control
    • 502 Material Handling Systems
  • Robotics; Transfer Systems
  • Static; ESD Control
    • 700 Manufacturing Services
  • Failure Analysis and other Analytical Services
  • Measurement; Inspection Service
  • Repair; Rebuild; Install Equipment; Maintenance Services; Spare Parts
    • 701 Manufacturing Services or Consulting
  • Automation & Robotics
  • Flat Panel Display (FPD) Design & Manufacturing
  • Manufacturing Process Support and Development
  • Package Materials; Interconnect; Subcomponent; Subassembly Design Services
    • 402 PV Systems
  • Measurement and Control Technology
  • Stand-Alone Systems
    • 403 PV Components, Tracking and Mounting Systems
  • Cables, Connectors, Junction Boxes
    • Loading ...

    :
    :


    Legend
    Available Timeslot
    Scheduled Appointment
    Personal Appointments
    Appointment Request
    Blocked Timeslot
    Restricted Timeslot
    Cancelled
    Declined
    For Technical Support with this webpage, please contact support.