Jusun Instruments Co., Ltd.

Hsin Tien City, Taipei,  NEW TAIPEI CITY 
Taiwan
http://www.jusun.com.tw
  • Booth: L0208
  • - 4th Floor


JUSUN offer the best solution for AMC & Nano Particle

JUSUN INSTRUEMNTS CO. LTD. can offer you
- our latest Nano-Particle Ssampling System for your Clean Room
- our Latest IMS Technology for non-Radioactive Source for AMC MA & MB Monitor
- our PPWD-IC (Series 9100IC) techonlogy to solve your AMC (MA/MB) issue in Facility and Litho Field
- our CRDS (Series 6000) tecnology to solve your Ammonia/HF/HCl/H2S/SO2 issue in Facility and Litho Field
- our PID (Series 6000 & Ion Science Tiger) technology to solve your VOC (MC) issue in Facility and Litho Field
- our PID/ECC techology to solve your Industrial Safety issue in Facility and ESH field
- our IMS with MSD technology to solve your VOC issue.
- ISO 17025 TAF Flow Rate Caibration Lab.
- ISO 9001 AMC Analysis Lab.

We also offer you following service for your request
- ISO 17025 Certified for our Gases Flow Lab.
- ISO 9001:2008 Gases Detector Calibration Lab.
- ISO 9001:2008 AMC Analysis Lab.

If you have any questions, please free contact with us in Taiwan by Toll-Free: 0800-000501 or in China +86-592264043. Please
visit our Web Site www.jusun.com.tw & e-mail us by jusun@jusun.com.tw for your inquires.


 Products

  • Nano Particle Sampling Devices
    NMCI is designed for sampling and collecting size-fractionated aerosol particle samples for gravimetric and/or chemical analyses....

  • Major Features are following as :
    - NMCI has relatively smaller pressure drop than low pressure impactors for reducing potential evaporation of volatile aerosol species.
    - Sturdy nozzle plates allow for ultrasonic cleaning.
    - The new smooth nozzle plates in the lower stages of the NMCI outperform those of the MOUDI in preventing nozzle clogging.
    - Patented nozzle design (7th-10th Stage)
    - Can replace the existing nozzles of the  MODUI with new patented nozzles
    - Each jet-to plate distance of Impactor has been calibrated to obtain highly accurate data
    - With CE mark
  • PPWD-IC for AMC and Exhaust Gas Monitor System
    Regard to Model 9100 PPWD-IC, the denuder is designed by Professor Chuen-Jinn Tsai of NCTU. The Major Applications are Clean Room Air Acid/Base Gases/ Aerosol (PM 2.5/10) & Ambient Acid/Base Contaminations Gases Monitor System....

  • Model 9100  PPWD-IC can offer you 
    - Direct Measurements of Nitrate, Sulfate, Nitrite, Phosphate and Chloride, Sodium, Ammonium, Calcium, Potassium, Magnesium,
      Hydrogen Chloride, Nitric Acid, Sulfur Dioxide and Ammonia
    - Provides a timely data stream of multi-pollutants that influence atmospheric chemistry and air quality
    - Operates and collects multi-pollutant data continuously
    - Provides gases and particles as time-resolved measurements
    - Allows for continuous improvement in source apportionment analyses
    - Helps to improve modeling necessary for determining the relative contributions of various emission sources
    - Meet Semi Guide ITRS 2017 AMC Method

  • 4th Generation Non-Radioactive Source IMS Analyzer
    The latest IMS technology provide you a Non-Radioactive Source IMS Device, and we also can detect Acid and Base Gas in same device to save your budget....

  • The New Generation IMS Analyzer provide you following features.
    .Sub. ppb limit of detection
    .IMS technique (Non-Radioactive Source)
    .0-500 ppb range or higher
    .Data output via 4-20 mA
    .Continuous and accurate monitoring under
        Positive & Negative Mode for Specific Acid/
        Base compounds
    .Turnkey package for quick, easy installation
    .Low Maintenance design with few moving
        parts
    .No reagents, paper tape, or expensive 
        consumables for operation.

  • TVOC Detector
    Molecular Analysis provide you the ppb level TVOC detector, and the detection limit of VOCs can down low to 1 ppb....

  • We can offer you
    - 4-20 mA Analog Ouput
    - Modbus output
    - 1 ppb resolution
    - Pump Drawing System 

Categories


Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".