Ruter Elastomer Co., Ltd

        Applications:

• Inspection of IC packages such as LGA, QFP, QFN, Memory(DDR3, GDDR5...Etc)
• Interposer application, B to B and Ball to Pad.

        Features:

• Durable and consistent contact
• Excellent electrical impedance
• Easy to maintain and replace
• No damage on solder balls or pads

        Specifications:

• Pitch: 0.3mm~1.5mm
• Thickness: 0.4mm~1.5mm
• Frequency: ~14GHZ
• Resistance: 50~100mΩ  

         Conditions: 

• Operating temperature: -20°C~+120°C
• Force request: 15~35 gram/per pad for 0.1mm traveling

        Applications:

• Fine pitch IC packages inspection as BGA, FBGA, PROBE CARD...Etc.
• The inspection of Passive components especially is the high-frequency request.
• Rom write, Memory inspection, flexible board testing ...etc.

        Features:

• Perfect reliability.
• Excellent electrical impedance.
• Easy for maintenance and replacement.
• Fine pitch and universal applications.

        Specifications:

• Pitch: 0.1mm, 0.075mm, 0.05mm
• Wire angle: 63°,75°,90°
• Thickness: 0.15mm~2mm
• Length & width: 5~50mm
• Protrusion: 0.01~0.05mm

• Operating temperature: -40°C~+140°C
• Compression rate: 10%~30%

 Applications:

• Inspections for RF device and RF components.
• Inspection of fine pitch IC packages such as BGA, LGA, QFP, PROBE CARDS, TSOP, QFN.
• Low profile, durable and consistent contact for PCB to PCB, and other similar assemblies, such as applications in some CSP chips.

         Features:

• Very low resistance
• Excellent electrical contact
• Testing cost down 
• Replace traditionally pogo pin
• Easy and convenient to maintain
• No solder ball damage

Gold plated connector (Wire Type) (鍍金線導電條)

         Applications:

• The interlink of the LCD and PCB, used widely in LCM assembly.

        Features:

• Excellent contact resistance less than 1Ω.

Zebra connector (Carbon Type) (導電斑馬條)
 

        Features:

• Shock and water resistant on portable electronics.
• Hest-resist, Vibration resist and adjustable.

Flexible metal circuit(FMC)

        Applications:

• Interlink various display modules-TN/STN/TFT...Etc.
• And PCB to PCB or PCB to Module.

        Features:

• Stabile electrical performance
• Excellent reliability
• No damage after bending
• Without tooling cost once sampling

        Standard marking system:

• Example:NI- 88- 055- 525- HH (60L)
• Details:

1. NI- a material of the conductor: Ni/ Au/ Sn
2. 88- conductor numbers: pins/(pitch no.+1)
3. 055-pitch: 055=0.55mm/ 060=0.6mm/ 080=0.8mm
4. 525-length of FMC: 525=52.5mm
5. HH-connect type:

                                         PP(press solder for both extremities)

                                         SS(connector socket for both extremities)

                                         PS(press solder with connector socket)

                                         OS(other special)

       6.(60L)- length of FMC: 60L(60mm distance of 2 extremities)

Soft Metal type-Gold Net Pill

        Features:

• The contact is soft as traditional carbon pill; the gold net pill contact PCB is better than 〝gold plated metal pill〞.
• Lifespan is better than conventional carbon pill.
• It will not have any dent during assembly due to the soft surface.
• Suitable for an automotive keypad that needs to withstand higher current and voltage.
• Electrical specification: from 0.5A(15V) to maximum 2.0A(30A). (Lifespan is inverse proportion with current and voltage)
• Contact resistance: less than 1Ω.
• Resist oxidation and SGS qualified.