Taiwan Pulse Motion Co., Ltd.

台中市,
Taiwan
http://www.tpm-pac.com

Booth: I2521
- 1st Floor

Inspire New Automation

Taiwan Pulse Motion (TPM), founded in 2009, is a forward-looking automation solution provider that mainly focuses on EtherCAT® and Motionnet®-based products. The product range covers PACs, Motion Cards, Digital I/O, Analog I/O, Closed-loop / Micro-step drives, and Custom carrier boards.

We are passionate about helping your business to grow through our specialized services, not only providing a wide range of EtherCAT/Motionnet products but also offering time-to-market custom design solutions in a variety of applications and industries.

Press Releases

EtherCAT 5-phase Stepper Drive 五相微步進驅動器 (20220801)

*EtherCAT 5-Phase Micro-Stepping Drive

*250 Micro-steps

*125,000 PPR

*Constant Current Control

*Low Vibration High Efficiency

*High Precision

Products

EtherCAT 5-Phase Micro-Stepping Drive: STP-K510A

EtherCAT 5-Phase Micro-Stepping Drive: STP-K510A Current 0.75A... More Info Less Info

STP-K510A

Features:

● EtherCAT CiA402 device profile

● 1-Axis 5-phase micro stepper drive

● STP-K510A : Current 0.75A

● Constant-current Driving System

● Low Vibration and Noise

● Micro step up to 800 divider

● Encoder feedback

● DIP switch for address setting

● Dimensions : L-75 x W-140 x H-30 mm

Specification:

EtherCAT
Serial interface	Fast Ethernet, Full-Duplex
Distributed Clock	0.5 / 1 / 2 / 4ms
Cable type	CAT5 UTP/STP Ethernet cable
Surge protection	10KV
Transmission speed	100 Mbps
Communication type	DC
CiA402 device profile	CSP, PP, Home

Driver
Input voltage	24 VDC±10% for main power 24 VDC±10% for I/O isolated interface
Drive model	5-phase Constant-current
Driving capacity	Max. 0.75A (STP-K510A) Max. 1.4A (STP-K511A)
Micro step	Up to 250 dividers
Resolution	Up to 125,000 pulse/revolution configured by software
I/O input signal	2 DI, PEL, MEL, ORG, and EMG
I/O output signal	1 DO for brakes (250mA)
Position control	Incremental / Absolute mode Data range: 32 bits
Homing mode	ORG, Limit & total 31 types
LED indicator	PWR, RUN, ERR, ALM, SVON, INP, PEL, MEL, ORG, EMG
Current consumption	3.1W typical (130mA/24VDC) no load
Ambient temperature	In use: 0~50°C In storage: -20~70℃
Humidity	In use: 35~85%(Noncondensing) In storage: 10~90%(Non-condensing)
Vib. resist	0.5G

EtherCAT 5-Phase Micro-Stepping Drive: STP-K511A

EtherCAT 5-Phase Micro-Stepping Drive: STP-K511A Current 1.4A... More Info Less Info

STP-K511A

Features:

● EtherCAT CiA402 device profile

● 1-Axis 5-phase micro stepper drive

● STP-K511A : Current 1.4A

● Constant-current Driving System

● Low Vibration and Noise

● Micro step up to 800 divider

● Encoder feedback

● DIP switch for address setting

● Dimensions : L-75 x W-140 x H-30 mm

Specification:

EtherCAT
Serial interface	Fast Ethernet, Full-Duplex
Distributed Clock	0.5 / 1 / 2 / 4ms
Cable type	CAT5 UTP/STP Ethernet cable
Surge protection	10KV
Transmission speed	100 Mbps
Communication type	DC
CiA402 device profile	CSP, PP, Home

Driver
Input voltage	24 VDC±10% for main power 24 VDC±10% for I/O isolated interface
Drive model	5-phase Constant-current
Driving capacity	Max. 0.75A (STP-K510A) Max. 1.4A (STP-K511A)
Micro step	Up to 250 dividers
Resolution	Up to 125,000 pulse/revolution configured by software
I/O input signal	2 DI, PEL, MEL, ORG, and EMG
I/O output signal	1 DO for brakes (250mA)
Position control	Incremental / Absolute mode Data range: 32 bits
Homing mode	ORG, Limit & total 31 types
LED indicator	PWR, RUN, ERR, ALM, SVON, INP, PEL, MEL, ORG, EMG
Current consumption	3.1W typical (130mA/24VDC) no load
Ambient temperature	In use: 0~50°C In storage: -20~70℃
Humidity	In use: 35~85%(Noncondensing) In storage: 10~90%(Non-condensing)
Vib. resist	0.5G

EtherCAT-207-D542-NNS

EtherCAT-207-D542-NNS... More Info Less Info

207-D542-NNS

Features:

● 64-Ch. DI and 32-Ch. DO with NPN type
● Max. 100Mbps transfer rate
● Easy installation with RJ45 phone jack and LED diagnostic
● Pluggable terminal block with spring plug connectors
● DIP switch for address setting
● DIN rail mounting (L-122 x W-127 x H-104 mm)

207-D542-NNS

64-Ch. DI and 32-Ch. DO with NPN type

EtherCAT module-● 64-Ch. DI and 32-Ch. DO with NPN type● I/O Module Max. 100Mbps transfer rate●EtherCAT IO Easy installation with RJ45 phone jack and LED diagnostic●EtherCAT IO Pluggable terminal block with spring plug connectors●EtherCAT IO DIP switch for address setting● DIN rail mounting (L-122 x W-127 x H-104 mm)Remote IO

EtherCAT®
Serial interface	Fast Ethernet, Full-Duplex
Distributed clock	1ms
Cable type	CAT5 UTP / STP Ethernet cable
Surge protection	10KV
Transmission speed	100 Mbps
I/O isolation voltage	3750Vrms
Input type	NPN type
Input impedance	5.6KΩ / 0.5W
Input current	±5mA(Max)
Output type	NPN : open collector Darlington; Integral suppression on diodes for inductive loads
Switch capacity	Each output Ch. is 100mA at 24VDC
Response time	On to Off, about 50μs ; Off to On, about 10μs
Over current protection	1A (Max) for each port (8-Ch.)


General
Power input	24VDC±10%
Power consumption	6W typical
Working temperature	0 to 60℃

EtherCAT-207-A220FI

EtherCAT-207-A220FI... More Info Less Info

207-A220-FI

Features

● 8-Ch. AI slave module with pluggable terminal

● Max. 100Mbps transfer rate

● Rotary switch for address setting

● Easy installation with RJ45 phone jack and LED diagnostic

● Pluggable terminal block with spring plug connectors

● DIN rail mounting (L-122 x W-66 x H-104 mm)

The 207-A220FI Series is an 8-channel Analog Input (AI) slave module with the pluggable terminal block. There are two series of 207-A220FI. With EtherCAT® control, it will lead to fast ethernet and full-duplex serial interface.I/O Module The transmission speed is up to 100 Mbps. Remote IO The digital slave can connect different slaves serially with cable CAT5 UTP/STP ethernet cable.EtherCAT IO

EtherCAT IO 207-A220FI: an 8-channel Analog Input slave module with ±10V input range.

EtherCAT®
Serial interface	Fast Ethernet, Full-Duplex
Distributed clock	1ms
Cable type	CAT5 UTP / STP Ethernet cable
Surge protection	10KV
Transmission speed	100 Mbps
I/O isolation voltage	3750Vrms


AD Converter
Effective resolution	16 bits
Accuracy	±0.5% (FI, FID)
Conversion time	~ 125µs
Input range	Single End: 4~20mA


General
Power input	24VDC±5%
Power consumption	3W typical
Working temperature	0°C~60°C (32°F~140°F) ambient temperature with air flow

Storage temperature	-20°C~80°C (-4°F~176°F)
Humidity	85% (non-condensing @60°C)
Size	L122 x W66 x H104 mm

RPX-L132D

RPX-L132D... More Info Less Info

RPX-L132D

Features

●A Motionnet Controller based on Raspberry Pi 4

●Support Python programming language

●Support OPC UA Server

●Support 6-Axis and Delta robot.

●Compact Size: 113 x 48 x 66 mm

Specifications
Raspberry Pi 4
SoC	Broadcom BCM2711 Quad coreCortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
GPU	Broadcom VideoCore VI
RAM	4 GB LPDDR4 SDRAM
Display & audio port	2 × micro-HDMI 2.0, 3.5 mm analogue audio-video jack
USB	2x USB 3.0 + 2x USB 2.0
Network	Native Gigabit Ethernet
Power Supply	5V via USB type-C up to 3A
Expansion	40-pin GPIO header
Storage	32G microSD card
Motionnet
Max. Rings	2
Max. Slaves	Ring 0 for DIO, Max. 16 slaves Ring 1 for Motion, Max. 16 axes
Advanced I/O
Isolated DIO	4 DI, also available for latch function. 4 DO
Encoder Input	EA/EB, 2 channels
Compare Trigger	8 channels
Power Supply	DC24V

EtherCAT SoftMotion Controller: ECPW

EtherCAT SoftMotion Controller: ECPW... More Info Less Info

EtherCAT SoftMotion Controller: ECPW

Taiwan Pulse Motion Co., Ltd.

Taiwan Pulse Motion (TPM), founded in 2009, is a forward-looking automation solution provider that mainly focuses on EtherCAT® and Motionnet®-based products. The product range covers PACs, Motion Cards, Digital I/O, Analog I/O, Closed-loop / Micro-step drives, and Custom carrier boards.

We are passionate about helping your business to grow through our specialized services, not only providing a wide range of EtherCAT/Motionnet products but also offering time-to-market custom design solutions in a variety of applications and industries.

Press Releases

Products

Categories

Send Mail