Watty Corporation

品川区, 東京都
Japan
https://www.watty.co.jp

Booth: L1106
- 4th Floor

Home
Products

Watty is a heater specialist for Gas line Heater. Welcome!

We are heater specialist for Gas line Heater and Hot plate. Welcome!

We have been working in SEMI about 20 years and have lots of experience about line heating.

Heater is 100% made in Japan and 100% man made, high quality, long life time.

Please try our specious heater on your SEMI tool.

Everything we can make custom from 1 set.

Products

Hi Watty Aluminum Nitride Heater

〈 Features 〉 Pure Japan-made general-purpose aluminum nitride heater Fast heating and cooling is possible. Low-cost. Short lead time... More Info Less Info

Heater structure	In order to prevent any air layer from remaining inside the heater, integral sintering is performed using our proprietary production method. As a result, we have realized small heaters with large calorific values.
Fast heating	The combination of a high-melting point heating element and single-body sintering provides a heater capable of fast heating.
Thermal shock tolerance	Thermal shock tolerance is superior to alumina, used in common ceramic heaters.
Temperature distribution	By combining the high thermal conductivity of aluminum nitride (AlN) with a heater pattern design based on our know-how, uniform temperature characteristics can be realized.

More detail visit https://watty.co.jp/en/heater2/aluminum-nitride2/　

Heat exchanger (WEX) SS

High efficiency heater series for gas heating<br />... More Info Less Info

〈 Features 〉
- 280g Lightweight and ultra-small gas heater with palm size or less
- Supports low flow rate 1 to 5 L/min 250 °C
- K thermocouple, thermostat, exterior insulation standard equipment
〈 Feature 〉

Flexible Surface condition Vacuum compatible

× × ×

〈 Target for heating 〉

Piping, container Metal Liquid Gas

○ × × ○

Specification
〇midget-type WEX₋SS
◆Size：70mm×32mm×42mm ※Excluding heat insulation materials and piping ◆Operating temperature:250°C ◆Rated flow rate:1~5L/Min ◆Rated capacity:140W(AC100Vor200V) ◆Temperature sensor:K thermocouple ◆Overheating prevention:With thermostat ◆Exterior insulation:Mantle(Stop with magic tape) ◆weight：280g

Heat exchanger (WEX) UL

High efficiency heater series for gas heating... More Info Less Info

〈 Features 〉
- UL499 compatible FileNo,E478998
- Flow rate 10 L/min 200 °C compatible
- K thermocouple and thermostat standard equipment
〈 Feature 〉

Flexible Surface condition Vacuum compatible

× × ×

〈 Target for heating 〉

Piping, container Metal Liquid Gas

○ × × ○

Specification
〇WEX-UL-S2-S(UL compatible)
◆Size:98mm×75mm×75mm ◆Operating temperature:200°C ◆Rated flow rate:10L/Min ◆Rated capacity:130W ◆Temperature sensor: K thermocouple ◆Excessive temperature rise prevention: With thermostat ◆Weight：1000g~ ◆UL499 compatible　FileNo,E478998

Heat Exchanger（WEX-SG)

High efficiency heater for gas heating... More Info Less Info

【Features】

●Heater for high temperature specialized for integrated gas system

●ultra-compact, ultra-lightweight

●1.5W seal type, 1.125W seal type

【Specification】
Type	1.5Ｗ seal	1.125Ｗ seal
Size (outer diameter, total height) ※1	φ40×L100ｍｍ	φ21.5×L90ｍｍ
Connection size (inch)	3/8”	1/4”
heater rating	100Ｖ90Ｗ or 200Ｖ90Ｗ
	*Watty Hi-Watty Light is used for the heater.
	* Withstanding voltage test: 1500 V for 1 minute
operating temperature（MAX）	200℃
flow rate（MAX）	10NL/min
usable gas type	inert gas
wetted part material	SUS316L
control sensor	K thermocouple Class 2
excess temperature rise prevention	Thermostat or K thermocouple
exterior insulation	glass cloth multilayer insulation

*1 Outer diameter does not include insulation.

Flexible	Surface condition	Vacuum compatible
×	×	×

Piping, container	Metal	Liquid	Gas
○	×	×	○

Flexible	Surface condition	Vacuum compatible
×	×	×

Piping, container	Metal	Liquid	Gas
○	×	×	○

Watty Corporation

Products

〈 Feature 〉

〈 Target for heating 〉

Specification

〈 Feature 〉

〈 Target for heating 〉

Specification

Categories

Send Mail