ORICUS SEMICON SOLUTIONS PTE. LTD.

Oricus’s Rubber tips come in NBR (Nitrile Rubber), HPR (High Performance Rubber), UPR (Ultra Performance Rubber), and CR (Composite Rubber) materials. All our rubber materials are developed and manufactured in-house specially for our Pick Up Tools. 

It can be made in Round, Square, Rectangular, and Custom designed outer profiles. Various tip designs such as Flat, Vacuum Relief, Groove, Multi-Hole, and Side Contact can be made to suit your particular die or device.

We manufacture Common holders, Tri-Lock holders, Compression holders, and Magnetic Holders that are designed to fit our Rubber Tips for various process and application requirements.

For optimal performance, our Rubber Tip Holders are the best match for our Rubber Tipsthat are available in Round, Square, Rectangular, and Custom designed outer profiles and tip designs such as Flat, Vacuum Relief, Groove, Multi-Hole, and Side Contact.

Tungsten Carbide Pick Up Tools are the toughest tools in our product lineup. We recommend the use of Tungsten Carbide Tools for the most demanding Pick and Place applications with high requirements for strength, temperature, and wear resistance.

Hybrid Pickup Tools are typically made of 2 materials, Alloy Steel for the tool body and Tungsten Carbide for the tool tip. We offer different joint technologies for the Metal-Carbide bond, which is dependent on your application requirements. Hybrid Tools offer the performance of Tungsten Carbide tools at a modesty higher price point of Alloy Steel tools.

Alloy Steel Pick Up Tools are tools made from Tool Steels, Stainless Steels, and Superalloys. We select Alloy Steels for tools that require high bond force, high-temperature resistance, and high resistance to wear.

Non Ferrous Tools are specifically designed for thin die applications with die thickness ≤0.1mm which are used for bonded devices deployed in harsh environments with high thermal transfer and heat distribution requirements.

Engineering Plastic (EP) Pick Up Tools are a family of polymeric Pickup Tools made primarily from materials such POM, PI, PAI, and PEI compounds.

Material Grades and Tool Designs are extensively researched and carefully developed by our R&D and Design team to ensure industry leading performance at a competitive price point.

Our Ejector Needles Product Line is made up of Standard Ejector Needles, Twin Ejector Needles and Quad Ejector Needles. 

Standard Needles are used to eject singulated dies from the wafer tape. Ejection Systems Needle designs such as Piece Through or Non-Piece Through are available, depending on your particular application.

Twin Needles are designed for small elongated die applications (≤0.7mmx1.0mm) to reduce the propensity of tilted dies during the ejection process. For elongated dies, single tip needles with one point of contact will create a pivot action and cause the die to see-saw when being ejected.

Quad Needles are designed for small die applications (≤1.0mm x 1.0mm) to reduce the propensity of tilted dies during the ejection process, where using multiple Standard Needles poses a space constraint. As compared to the single needle with spherical radius concept, Quad Needles greatly increases the stability and performance of the small die ejection process with minimum die tilt.

Needle Holders are a critical interface component between the machine and the rest of the components of a die ejection system. Typically, Needle Holders are used in combination with Ejector Needles and Pepper Pots.

Pepper Pots are designed to ensure that there is sufficient downwards vacuum suction force on the wafer tape to facilitate a smooth die ejection process. The layout and number of vacuum holes plays an important role for the target die and neighboring dies to be processed optimally.

Adhesive Dispensing Tools consists of primarily Adhesive Dispensing Nozzles and Adhesive Stamping Tools. Both tools are used for the application of adhesives to leadframes or substrates albeit with different adhesive delivery methods.

Adhesive Dispensing Nozzles are designed with Single Tubing or Multi Tubing according to the process, application or pattern requirements. Single Tubing Adhesive Dispensing Nozzles are suited for dotting micro amounts of adhesives for small die sizes or used as an Adhesive Writing Pen. Multi Tubing designs allows for better throughput with a higher volume of adhesive delivery within the same timeframe.

Adhesive Stamping Tool's primary function is to transfer adhesives from the Flux Plate or Rotating Cup onto the leadframe or substrate.

Flux Systems comprises of two main components, Flux Plates and Blade Scrapers. Flux Plate’s primary function is to hold the flux within the reservoir while the stamping tool dips into the flux for transfer to the leadframe or substrate.

The precision of the Flux Plates and Blade Scrapers are of significant importance in the implementation of a successful adhesive stamping process.

Oricus’s Adhesive Systems are designed and manufactured according to your selected adhesive’s viscosity and thixotropy specifications to ensure optimal dispensing performance.