S-Tech Co., Ltd.

33, Secheon-ro 3-gil, Dasa-eup, Dalseong-gun, Daegu 42921, Republic of Korea
Daegu,  Daegu  42921

Korea (South)
http://www.stech.co.kr/
  • Booth: 1946

S-TECH Co., Ltd. is a professional ingot grower manufacturer located in Daegu, South Korea.

We produce single mono-crystalline ingot growers for the photovoltaic & semiconductor industry. From our equipment, ingots with the diameter of 6 to 12inches can be produced. We also provide 450mm ingot growing equipment for the cathode industry. Based on our R&D center and in-house production, S-TECH provides total solution services to customers in the one stop process and delivers differentiated values with more than 30 years of accumulated experiences.


 Products

  • SS4B Ingot Grower (Semiconductor)
    Grower for Ø300mm semiconductor ...

  • Typical Ingot Diameter : 12inch Semiconductor Grower (Superconducting Magnet Type)
    Maximum Charge Amount : 440 kg
    Hot Zone Size : Normal 32inch
    Maximum Crystal Length Approx. : 2000mm
    Pull Chamber Length : 3000 or 3500mm
    Seed Pulling Speed (slow) : 0.10~6.00mm/min
    Seed Pulling Speed (fast) : 1200mm/min
    Seed Rotating Speed : 1.00~20.00rpm/Accuracy : 1%
    Crucible Lifting Speed (fast, slow) : Slow 0.01~1.00mm/min, Fast 260mm/min
    Crucible Lifting Capacity Approx. : 1000kg
    Crucible Rotating Speed : 0.10~20.00 rpm
    Crucible Lifting Stroke : Available up to 750mm
    Chamber Materials Inside : SUS316L
    Outside : SUS304
    Maximum Height : Approx. 10,500mm
    Ar Pressure / Flow : 2~3kg/㎠, Max. flow : 200LPM
    Air Pressure (Valve control) : 4~6kg/㎠, Max. flow : 100LPM
    Cooling Water Pressure : 2~3kg/㎠, Max 5kg/㎠
    Water Consumption Approx. : 600~700LPM
    Cooling Water Inlet Temp : Customer's Spec
    Power Supply Maximum Power : Side heater 180kW/Bottom heater 50kW (IGBT/Option)
    Dust Filter Housing : Metal Filter (Option)

Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".


For Technical Support with this webpage, please contact support.