The Eagle V5C (Coolant Version) is designed to be an ultra-rigid 5-axis vertical machining center with the capacity to handle a 440-pound workpiece on a 15.75” rotary table surface. The Heidenhain TNC-640 control unit with a 17” display is mounted on a moveable pedestal for optimal positioning convenience. The Eagle V5C is designed with a side opening in the casting to allow robot loading from the right side with pallets up to 15.7” square.
CAPABILITIES:
- Can handle a 440-pound workpiece on a 15.75” table surface
- Allows robot loading from the right side with pallets up to 15.7” square via side opening design
- Achieves high machine rigidity, vibration dampening, working precision, and finish quality via a U-shape polymer concrete base for best vibration dampening and higher weight, resulting in optimum behavior between moving and static mass
- Hits high working speeds via a 33-HP, 36,000-RPM integrated spindle, -heavy-duty, roller-type linear guideways, and large-diameter ball screws and linear glass scales in both the X and Y axis
- Integrated high-dynamic 4th/5th axis rotary table provides direct drive motors to both axes
- Performs high-precision cuts with the X, Y, Z, B, and C axis moving simultaneously
- Separate servo motors and shaft encoders are used to provide both high-speed and high-accuracy table positioning
- Can easily handle surface machining, spiral contour machining, irregular contour machining, and other complex cutting tasks
- Superior drive mobility and power efficiency compared to conventional worm gear setup machines thanks to zero-backlash B axis gear and C-rotary axis direct drive motor with rotary encoders
- The P3 coolant system provides high pressure through tool coolant along with filtration and a chip conveyor
- Extraordinary heat monitoring and control available through “Active Temperature Control,” which includes thermal sensors and active cooling lines running throughout the machine structure
COMPONENTS:
- Integrated direct drive 4/5-axis system (without T-slot table)
- Maximum acceleration: 49 ft/s²
- HF spindle 33 HP, 36,000 RPM, HSK-E50, and 32-pos ATC (80 optional)
- Renishaw infrared measuring probe
- Blum laser system for tool breakage detection and tool length/diameter compensation
- Vibration-dampening polymer concrete machine bed
- 3-point foundation setup/leveling
- Ball screws with direct drive AC motors
- Absolute measuring with glass scales
- Oil-mist lubricant system, spindle external
- 2-color status light
- Auto lube system, both drives and ways
- Full lining with dust and liquid protection
- LED machine lamp in work area
- P3 coolant system
- 185-gallon tank capacity
- 580 PSI through tool coolant
- External coolant
- Police filter
- Belt filter
- Chip conveyor (chip bucket optional)
- Precision package 3 for 5-axis machines – Temperature-distribution compensation, including:
- ATDC (Automatic Temperature Drift Control)
- 5-Axis compensation
- Heidenhain option (kinematics optional)
- Ceramic ball for kinematics accord
- Precision package 5 for 5-axis machines: Includes active temperature control
- Active cooling lines run through the machine to remove heat from the machine base, spindle mounts, floating bearings, fixed bearings, guideways, etc.
- Heidenhain CTC (Cross-Talk Compensation) which corrects for dynamic position errors caused by axis acceleration and braking
USER INTERFACE:
- Heidenhain TNC-640 5-axis simultaneous control
OPTIONAL ACCESSORIES:
- HF spindle 20 HP, 42,000 RPM, HSK-E40 w 32-pos ATC
- 100-position ATC HSK-E40
- 80-position ATC HSK-E50
- Table clamping and pallet systems from EROWA, Hirschmann and system 3R
- ICS 2 ATS internal coolant supply with aerosol/dry lubrication
- T-slot table to cover the 4/5-axis (Converts the machine to 3-axis operation)
- 3-color status light
- Oil-mist suction unit
- Chip bucket
- Flushing pistol
- Coolant chiller
- Chip conveyor for dry milling (incl: chip bucket)
- Upgrade to P5 coolant system 317-gallon capacity, scraper chain conveyor, 1160 PSI through tool coolant, work-area flushing, paper belt filter, and police filter
- DCM (Dynamic Collision Monitoring)
- ECOTEC energy-saving function
- Multichange easy basic unit (incl: gripper, 40-pos or 5-pos or 4-pos magazine, workpiece change place, and connection to machine)