Loading...

Nagase Chemtex America LLC.

Delaware,  OH 
United States
https://nagasechemtex.com/
  • Booth: 576

Overview

About Nagase Chemtex America, LLC.

Nagase Chemtex America Corp. (NCU) is a custom formulator and global manufacturer of electronic materials (conductive adhesives, non-conductive adhesives, photoresists, underfills, thick film inks, encapsulants, etc.) for the photovoltaic, semiconductor, circuit assembly, printed electronics, printer head, camera module, disk drive and photonics assembly markets. Materials are specifically formulated to meet the severe reliability requirements of next generation devices.

NCU is a wholly owned subsidiary of the Nagase Corporation. The company creates continual improvements that will guide its customers into the future. For more information, visit www.nagasechemtex.com.

  Products

  • DF-2000 series
    DF-2000 is a dry film negative tone photoresist. Applications include manufacturing printer heads, medical microfluidics, fabricating acoustic filters, metallization and etching of wafers, sealing TSV's mainly for use in permanent applications....

    • DF-2000 is a dry film negative tone photoresist that comes in thicknesses from 3 to 50 um and in widths for 200 and 300mm wafers. Applications include manufacturing printer heads, medical microfluidics, fabricating acoustic filters, metallization and etching of wafers, sealing TSV's mainly for use in permanent applications. The material has very consistent batch to batch photospeed and features as small as 2 to 3um are possible with the 3 to5um film.
  • CA-293
    CA-293 is an ultra-flexible, non-silicone thermal Interface Material that is highly electrically and thermally conductive. Uses include direct lid attach, first level TIM or as a die attach for large die....

    • CA-293 is an ultra flexible, non-silicone thermal Interface Material that is highly electrically and thermally conductive. The material can be used for direct lid attach, first level TIM or as a die attach for large die. CA-293 had a glass transition temperature (Tg) of -35 degrees centigrade. Use CA-293 where extremely low stress and high thermal transfer are required.
  • 631-188-3
    631-188-3 is a dual cure adhesive (thermal and UV) designed for active optical alignment of optoelectronic devices...

    • 631-188-3 is a dual cure adhesive (thermal and UV) designed for active optical alignment of optoelectronic devices. The material can be tacked with UV and then post thermally cured. This product features low shrinkage on cure, low outgassing, lowCTE (14ppm/C) and a high glass transition temperature to enable the holding of tight optical alignments. Can be used to optically align transceivers, focal lenses or lidar

Categories

1 FLEX
  • Materials
    • 300 Packaging and Assembly Materials
  • Adhesives; Epoxies; Die Attach Compounds; Under fill
  • Bonding; Interconnect: Wire/Ribbon/Tape/Capillaries/Tools
  • Thermal Interface Materials; Heat Sinks
  • Thick Film Pastes; Materials
  • Thin Film; Dielectric Film Materials
    • 301 Chemicals & Solids
  • Photo Resist; Specility Layers; Developers & Ancillaries
    • 306 PV Materials
  • Other

    • Send Email

    Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".

    Loading ...

    :
    :


    Legend
    Available Timeslot
    Scheduled Appointment
    Personal Appointments
    Appointment Request
    Blocked Timeslot
    Restricted Timeslot
    Cancelled
    Declined